Seagate Enterprise Capacity 3.5 HDD/Constellation ES Constellation ES (.1) SAS
Seagate Enterprise Capacity 3.5 HDD/Constellation ES Manual
View all Seagate Enterprise Capacity 3.5 HDD/Constellation ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Seagate Enterprise Capacity 3.5 HDD/Constellation ES manual content summary:
- Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 1
Product Manual Constellation® ES.1 SAS Standard Models ST2000NM0001 ST1000NM0001 ST500NM0001 Self-Encrypting Drive Models ST2000NM0021 ST1000NM0021 ST500NM0021 SED FIPS140-2 Models ST2000NM0041 ST1000NM0041 ST500NM0041 100650925 Rev. G January 2013 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 2
Technology LLC in the United States and/or other countries. Constellation ES.1 SAS and SeaTools are either trademarks or registered trademarks of 877-PUB-TEK1 (877-782-8351) to request permission. When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 3
capacities 8 3.6 Programmable drive capacity 8 3.7 Factory-installed options 8 4.0 Performance characteristics 9 4.1 Internal drive errors 12 5.1.4 Interface errors 12 5.2 Reliability and service 13 5.2.1 Annualized Failure Rate (AFR) and Mean i Constellation ES.1 SAS Product Manual, Rev. G - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 4
10.2 Cooling 41 10.3 Drive mounting 42 10.4 Grounding 42 11.0 Interface requirements 43 11.1 SAS features 43 11.1.1 task management functions 43 11.1.2 task management responses 43 11.2 Dual port support 43 11.3 SCSI commands supported 44 ii Constellation ES.1 SAS Product Manual, Rev. G - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 5
.4.7 Power 57 11.5 Signal characteristics 57 11.5.1 Ready LED Out 57 11.5.2 Differential signals 58 11.6 SAS-2 Specification Compliance 58 11.7 Additional information 58 iii Constellation ES.1 SAS Product Manual, Rev. G - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 6
14. Figure 15. Figure 16. Figure 17. Figure 18. Figure 19. 2TB model current profiles 22 1TB model current profiles 23 500GB model current profiles 24 2TB models (3Gb) DC current and power vs. input (detail 55 SAS transmitters and receivers 57 CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G IV - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 7
data recovery services, visit http://www.seagate.com/services-software/data-recovery-services/ For Seagate OEM and Distribution partner portal, visit https://direct.seagate.com/portal/system For Seagate reseller portal, visit http://spp.seagate.com Constellation ES.1 SAS Product Manual, Rev - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 8
describes Seagate Technology® LLC, Constellation® ES.1 Series SAS (Serial Attached SCSI) disk drives. Constellation ES.1 drives support the SAS Protocol specifications to the extent described in this manual. The SAS Interface Manual (part number 100293071) describes the general SAS characteristics - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 9
meet the requirements of Section 10.3. 2.1 STANDARDS The Constellation ES.1 family complies with Seagate standards as noted in the appropriate sections of this manual and the Seagate SAS Interface Manual, part number 100293071. The drives are recognized in accordance with UL 60950-1 as tested - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 10
EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recognized lab. • Family name: Constellation ES • Certificate number: STX-ST2000NM0001 ) is over the threshold defined by the China RoHS MCV Standard. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 4 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 11
Security Subsystem Class Enterprise Specification, Rev. 1.0 Specification for Acoustic Test Requirement and Procedures Seagate part number: 30553-001 In case of conflict between this document and any referenced document, this document takes precedence. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 12
Constellation ES.1 drives are random access storage devices designed to support the Serial Attached SCSI Protocol as described in the ANSI specifications, this document, and the SAS Interface Manual their systems with either SAS or SATA hard disk drives. This allows you to continue to leverage - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 13
3.1 STANDARD FEATURES Constellation ES.1 drives have the following standard features: • Perpendicular recording technology • 1.5 / 3 / 6 Gb Serial Attached SCSI (SAS) interface • Integrated dual port SAS controller supporting the SCSI protocol • Support for SAS expanders and fanout adapters • - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 14
= 4.16ms • Background processing of queue • Supports start and stop commands (spindle stops spinning) points for this product are: Table 1 Capacity (Blocks) Sector Size ST2000NM0001 ST2000NM0021 ST2000NM0041 drive shipped, but extra copies may be ordered. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 15
Constellation ES.1 drives. 4.1 INTERNAL DRIVE CHARACTERISTICS ST2000NM0001 ST1000NM0001 ST2000NM0021 ST1000NM0021 ST2000NM0041 ST1000NM0041 Drive capacity 2TB 1TB SAS physical interface" on page 53 and the SAS Interface Manual (part number 100293071) for additional timing details. 4.2.1 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 16
is divided into logical segments from which data is read and to which data is written. The drive keeps track of the logical block addresses of the data stored in each segment of the buffer (disconnect/reconnect control) in the SAS Interface Manual. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 10 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 17
look-ahead) is enabled (enabled by DRA = 0), the drive enables prefetch of contiguous blocks from the disk when it senses that a prefetch hit will likely occur. The drive disables prefetch when it decides that a prefetch hit is not likely to occur. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 11 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 18
data error is defined as a failure of the drive to recover data from the media. These errors occur due to head/media or write problems. Unrecoverable data errors are only detected during read error, illegal code, loss of word sync, or CRC error. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 12 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 19
Constellation ES.1 disk drives by ensuring that the drive receives adequate cooling. Section 6.0 provides temperature measurements and other information that may be used to enhance the service life of the drive based on the following assumptions for Enterprise Storage System environments: • 8,760 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 20
and will not perform off-line functions. You can measure off-line attributes and force the drive to save the data by using the Rezero Unit command. Forcing S.M.A.R.T. resets the timer so is a separate Failure History Counter for each attribute. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 14 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 21
Thermal monitor Constellation ES.1 drives implement a temperature warning system which: 1. Signals the host if the temperature exceeds a value which would threaten the drive. 2. Signals the host if the temperature exceeds a user-specified value. 3. Saves a S.M.A.R.T. data frame on the drive which - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 22
to zero, the test failed for the reason reported in the field. The drive will report the failure condition and LBA (if applicable) in the Self-test Results Log parameter. The Sense key, ASC, ASCQ, and FRU are used to report the failure condition. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 16 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 23
information Seagate customer service centers are the only facilities authorized to service Seagate drives. Seagate does not sanction any third-party repair facilities. Any unauthorized repair or tampering with the factory seal voids the warranty. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 17 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 24
UNIT command (OPERATION CODE 1Bh). This allows the host to directly transition the drive to any supported PowerChoice mode. If both the Power Condition mode page and START STOP UNIT command to Active, Idle_A, Idle_B, Idle_C, Standby_Y, Standby_Z CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 18 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 25
consumption. There is no additional drain on the 12V supply. Table 2 2TB drive (Standard & SED model) DC power requirements Voltage Regulation Avg idle current DCX 1.66 0.78 0.42 0.82 0.44 1.10 0.62 0.94 0.42 0.97 0.44 1.34 0.58 CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 19 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 26
Table 3 1TB drive (Standard & SED model) DC power requirements Voltage Regulation Avg idle current DCX Advanced idle current Idle_A Idle_B 0.53 0.36 0.55 0.38 1.32 1.54 0.77 0.27 0.81 0.29 1.09 0.51 0.94 0.27 1.03 0.29 1.36 0.48 CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 20 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 27
includes ripple, noise, and transient response. [8] Operating condition is defined as random 8 block reads. [9] During idle, the drive heads are relocated every 60 seconds to a random location within the band from three-quarters to maximum track. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 21 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 28
multiple drives from a common supply, careful consideration for individual drive power given below are peak-to-peak measurements and apply at the drive power connector. +5v = 250 mV pp from 100 Hz 5V (bottom) current profiles for the Constellation ES.1 drives are shown below. Figure 1. 2TB model - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 29
Figure 2. 1TB model current profiles Note: All times and currents are typical. See Table 2 for maximum current requirements. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 23 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 30
Figure 3. 500GB model current profiles Note: All times and currents are typical. See Table 2 for maximum current requirements. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 24 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 31
to the following I/O rate curve (see Figure 4). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 For power details about SED vs. non-SED drive, please refer to section 7.8. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 25 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 32
to the following I/O rate curve (see Figure 5.). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 power details about SED vs. non-SED drive, please refer to section 7.8. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 26 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 33
on the vertical axis. To calculate BTUs per hour, multiply watts by 3.4123. Figure 6. 1TB models (3Gb) DC current and power vs. input/output operations per second Note. For power details about SED vs. non-SED drive, please refer to section 7.8. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 27 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 34
watts on the vertical axis. To calculate BTUs per hour, multiply watts by 3.4123. Figure 7. 1TB models (6Gb) DC current and power vs. input/output operations per second For power details about SED vs. non-SED drive, please refer to section 7.8. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 28 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 35
to the following I/O rate curve (see Figure 8). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 For power details about SED vs. non-SED drive, please refer to section 7.8. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 29 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 36
to the following I/O rate curve (see Figure 9.). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 power details about SED vs. non-SED drive, please refer to section 7.8. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 30 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 37
the enclosure to minimize drive movement. The limits of shock and vibration defined within this document are specified with the drive mounted by any of the four methods shown in Figure 11, and in accordance with the restrictions of Section 10.3. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 31 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 38
60 in (1524 mm) 48 in (1219 mm) 42 in (1067 mm) 36 in (914 mm) Drives packaged in single or multipacks with a gross weight of 20 pounds (8.95 kg) or less by Seagate for mounting Note. Image is for reference only, may not represent actual drive. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 32 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 39
not be any discrete tones more than 10 dB above the masking noise on typical drives when measured according to Seagate specification 30553-001. There will not be any tones more alternatives. 6.5.8 Electromagnetic susceptibility See Section 2.1.1.1. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 33 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 40
. Refer to Figure 12 for detailed mounting configuration dimensions. See Section 10.3, "Drive mounting." Weight: (maximum) 500GB models 1TB models 2TB models 1.34 lb 1.41 lb 1.57 lb 610 g 640 g mm Figure 12. Mounting configuration dimensions CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G in mm 34 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 41
module compliance/conformance testing. Seagate Enterprise SED The SEDs referenced in this Product Manual have been validated by CMVP services. Figure 13. Example of FIPS tamper evidence labels. Note. Image is for reference only, may not represent actual drive. CONSTELLATION ES.1 SAS PRODUCT MANUAL - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 42
This prevents the user data from being accessed without the appropriate credentials when the drive has been removed from its cabinet and installed in another system. When the drive is shipped from the factory, the firmware download port is unlocked CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 36 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 43
. In order to execute the RevertSP method the unique PSID (Physical Secure ID) printed on the drive label must be provided. PSID is not electronically accessible and can only be manually read from the drive label or scanned in via the 2D barcode. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 37 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 44
if the ARRE or AWRE bits are one. The drive will still perform data recovery actions within the limits defined by the Read Retry Count, Write Retry Count, and Recovery Time Limit parameters. However, the drive does not report any unrecovered errors. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 38 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 45
to service drive goes to idle during the Pre-Scan period. In the event that the drive is in a high transaction traffic environment and is unable to complete a BMS scan within 24 power on hours BMS will disable Pre-Scan to restore full performance to the system. CONSTELLATION ES.1 SAS PRODUCT MANUAL - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 46
Descriptor (VPD) page 0x86 provides bits to indicate the PI Types supported and which PI fields the drive supports checking. Note. For further details with respect to PI, please refer to SCSI Block Commands - 3 (SBC-3) Draft Standard documentation. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 40 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 47
the appropriate bay in your host system using the instructions provided by the host system. This connects the drive directly to your system's SAS connector. The SAS the drive and other heat sources within the rack, cabinet, or drawer environment. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 41 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 48
mounting the drive in the host equipment. Increased radiated emissions may result if you do not provide the maximum surface area ground connection between system ground and drive ground. This is the system designer's and integrator's responsibility. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 42 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 49
interface requirements as implemented on Constellation ES.1 drives. Additional information is provided in the SAS Interface Manual (part number 100293071). 11.1 SAS FEATURES This section lists the SAS-specific features supported by Constellation ES.1 drives. 11.1.1 task management functions Table - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 50
8 lists the SCSI commands supported by Constellation ES.1 drives. Table 8 Supported commands Command name Change Definition Compare Copy Copy and Verify Format Unit [1] [5] DCRT bit supported DPRY bit supported DSP bit supported IMMED bit supported IP bit supported SI (Security Initialize) bit - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 51
5Ah 5Eh 5Fh 34h 08h 28h A8h 88h 7Fh/0009h 3Ch 25h 9Eh/10h 37h B7h 3Eh 9Eh/11h 07h 1Ch 17h 57h Supported Y Y Y Y Y Y [2] Y Y [2] Y Y Y Y Y Y N Y Y Y Y Y N Y Y Y N Y Y Y Y N Y N Y (non-SED drives only) Y Y Y Y Y (non-SED drives only) Y Y Y Y Y Y Y CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 45 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 52
1Dh 33h 1Bh 35h 91h 00h 2Fh AFh AFh 7Fh/000Ah 0Ah 2Ah AAh 8Ah 7Fh/000Bh 2Eh AEh 8Eh 7Fh/000Ch Supported Y Y Y Y Y Y Y N Y Y N Y Y (SED drives only) N N N Y (SED models only) Y (SED models only) Y Y Y Y Y N Y Y Y Y Y Y N Y N Y Y Y Y N Y N Y Y N Y N CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 46 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 53
for mode pages supported. [4] Y = Yes. Command is supported. N = No. Command is not supported. A = Support is available on special request. [5] There is approximately a 1.5 increase in time to format a SED drive versus a non-SED drive of the same capacity. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 54
data that the drive should return to the initiator per the format given in the SAS Interface Manual. Table 9 Constellation ES.1 inquiry data Bytes 20 * Copyright year (changes with actual year). ** SCSI Revision support. See the appropriate SPC release documentation for definitions. PP 10 = - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 55
, hard reset drive in response to the Mode Sense command pages for SCSI implementation (see the SAS Interface Manual ). DEF = Default value. Standard OEM drives are shipped configured this way. CHG = Changeable bits; indicates if default value is changeable. CONSTELLATION ES.1 SAS PRODUCT MANUAL - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 56
Table 10 Mode Sense data changeable and default values for 2TB drives MODE DATA HEADER: 01 92 00 10 00 00 00 08 BLOCK DESCRIPTOR: e8 e0 88 b0 00 00 02 00 MODE PAGES: DEF 81 ff ff ff ff ff ff ff DEF 80 06 00 80 0f 00 00 00 CHG 80 06 b7 c0 8f 00 00 00 CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 50 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 57
Table 11 Mode Sense data changeable and default values for 1TB drives MODE DATA HEADER: 01 92 00 10 00 00 00 08 BLOCK DESCRIPTOR: 74 70 6d b0 00 00 02 00 MODE PAGES: DEF 81 ff ff ff ff ff ff ff DEF 80 06 00 80 0f 00 00 00 CHG 80 06 b7 c0 8f 00 00 00 CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 51 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 58
Table 12 Mode Sense data changeable and default values for 500GB drives MODE DATA HEADER: 01 92 00 10 00 00 00 08 BLOCK DESCRIPTOR: 3a 38 60 30 00 00 02 00 MODE PAGES: DEF ff ff ff ff ff ff ff DEF 80 06 00 80 0f 00 00 00 CHG 80 06 b7 c0 8f 00 00 00 CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 52 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 59
Select command needed to save RPL and rotational offset bytes Table 14 Miscellaneous status Supported Y Y Y Y Y Y Y Y N N Status Good Check condition of Seagate's SAS drives are provided in the SAS Interface Manual. Figure 16. Physical interface CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 53 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 60
.875 1.27 (14X) 1.27 (6X) 5.08 B 0.84 0.05 (22X) 0.15 B 4.90 0.08 P15 Figure 17. SAS device plug dimensions P1 S1 S7 CL OF DATUM B CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 54 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 61
SURFACE FLUSH TO DATUM A 0.03 1.23 0.05 65 30 0.08 0.05 Detail 2 1.90 0.08 Figure 18. SAS device plug dimensions (detail) 2.40 0.08 0.10 A D SECTION B - B CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 55 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 62
input pair Diff output pair Diff. input pair Diff output pair * - Short pin to support hot plugging NC - No connection in the drive. Pin P1* P2* P3 P4 P5 P6 P7 P8* P9* P10 P11* P12 P13 Volts charge 12 Volts 12 Volts Signal type Open collector out CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 56 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 63
name information. 11.5.1 Ready LED Out The Ready LED Out signal is driven by the drive as indicated in Table 16. Table 16 Ready LED Out conditions NORMAL COMMAND ACTIVITY Ready LED off, 0.5 seconds on and off for 0.5 seconds) Toggles on/off CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 57 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 64
layers of the SAS interface, refer to the Seagate SAS Interface Manual, part number 100293071. For more information about the SCSI commands used by Seagate SAS drives, refer to the Seagate SCSI Commands Reference Manual, part number 100293068. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 58 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 65
Department of Communications 3 capacity CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G unformatted 9 CBC 36 CE Marking 3 check condition status 53 China RoHS directive 4 Cipher Block Chaining 36 class B limit 3 clear ACA function 43 clear task set function 43 commands supported 44 condensation 31 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 66
the drive 13 humidity 31 humidity limits 31 I Identifying a PI drive 40 Idle Read After Write 40 Idle1 18 Idle2 18 Idle3 18 inquiry data 48 installation 41 guide 5 interface commands supported failure. See MTBF media description 7 Media Pre-Scan 39 CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 60 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 67
spindle operation 53 Zero latency read 53 miscellaneous status support ACA active 53 ACA active, faulted initiator 53 PCBA 42 peak bits per inch 9 CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G INDEX peak operating current 8 specifications 12 reliability and service 13 repair and return information - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 68
57 transporting the drive 17 Trusted Computing Group 36 Type 1 PI format 40 Type 2 PI format 40 U unformatted 8 Unrecoverable Errors 12 unrecovered media data 12 V vibration 31, 33 W warranty 17 Z zero latency read 53 T Taiwanese BSMI 4 CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 62 - Seagate Enterprise Capacity 3.5 HDD/Constellation ES | Constellation ES (.1) SAS - Page 69
Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA
Product Manual
Constellation
®
ES.1 SAS
100650925
Rev. G
January 2013
Standard Models
ST2000NM0001
ST1000NM0001
ST500NM0001
Self-Encrypting Drive Models
ST2000NM0021
ST1000NM0021
ST500NM0021
SED FIPS140-2 Models
ST2000NM0041
ST1000NM0041
ST500NM0041