Home » Seagate Manuals » Hard Drives » Seagate Enterprise Capacity 3.5 HDD/Constellation ES » Manual Viewer

Seagate Enterprise Capacity 3.5 HDD/Constellation ES Constellation ES (.1) SAS - Page 53

Warning., Command name, Command code, Supported

View all Seagate Enterprise Capacity 3.5 HDD/Constellation ES manuals

Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Table 8 Supported commands Command name Write Buffer (modes 0, 2, supported) Write Buffer Firmware Download option (modes 5, 7, Ah and Bh) [3] Firmware Download option (modes 4, 5, 7) Write Long (10) Write Long (16) Write Same (10) [5] PBdata LBdata Write Same (16) [5] Write Same (32) XDRead XDWrite XPWrite Command code 3Bh 3Bh 3Fh 9Fh/11h 41h 93h 7Fh/000Dh 52h 50h 51h Supported Y (non-SED drives only) Y (non-SED drives only) Y (SED drives only) Y Y Y N N Y N N N N [1] Constellation ES.1 drives can format to 512, 520 or 528 bytes per logical block. [2] Warning. Power loss during flash programming can result in firmware corruption. This usually makes the drive inoperable. [3] Reference Mode Sense command 1Ah for mode pages supported. [4] Y = Yes. Command is supported. N = No. Command is not supported. A = Support is available on special request. [5] There is approximately a 1.5 increase in time to format a SED drive versus a non-SED drive of the same capacity. CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 47

Section	Page
Constellation® ES.1 SAS	1
Seagate® Technology Support Services	7
1.0 Scope	8
2.0 Applicable standards and reference documentation	9
2.1 Standards	9
2.1.1 Electromagnetic compatibility	9
2.1.2 Electromagnetic compliance	9
2.1.3 European Union Restriction of Hazardous Substances (RoHS)	10
2.1.4 China Restriction of Hazardous Substances (RoHS) Directive	10
2.2 Reference documents	11
3.0 General description	12
3.1 Standard features	13
3.2 Media description	13
3.3 Performance	14
3.4 Reliability	14
3.5 Formatted capacities	14
3.6 Programmable drive capacity	14
3.7 Factory-installed options	14
4.0 Performance characteristics	15
4.1 Internal drive characteristics	15
4.2 Seek performance characteristics	15
4.2.1 Access time	15
4.2.2 Format command execution time for 512-byte sectors (minutes)	15
4.2.3 General performance characteristics	16
4.3 Start/stop time	16
4.4 Prefetch/multi-segmented cache control	16
4.5 Cache operation	16
4.5.1 Caching write data	17
4.5.2 Prefetch operation	17
5.0 Reliability specifications	18
5.1 Error rates	18
5.1.1 Recoverable Errors	18
5.1.2 Unrecoverable Errors	18
5.1.3 Seek errors	18
5.1.4 Interface errors	18
5.2 Reliability and service	19
5.2.1 Annualized Failure Rate (AFR) and Mean Time Between Failure (MTBF)	19
5.2.2 Preventive maintenance	19
5.2.3 Hot plugging the drive	19
5.2.4 S.M.A.R.T.	20
5.2.5 Thermal monitor	21
5.2.6 Drive Self Test (DST)	21
5.2.7 Product warranty	23
6.0 Physical/electrical specifications	24
6.1 PowerChoiceTM power management	24
6.1.1 PowerChoice reporting methods	24
6.2 AC power requirements	25
6.3 DC power requirements	25
6.3.1 Conducted noise immunity	28
6.3.2 Power sequencing	28
6.3.3 Current profiles	28
6.4 Power dissipation	31
6.5 Environmental limits	37
6.5.1 Temperature	37
6.5.2 Relative humidity	37
6.5.3 Effective altitude (sea level)	37
6.5.4 Shock and vibration	37
6.5.5 Acoustics	39
6.5.6 Air cleanliness	39
6.5.7 Corrosive environment	39
6.5.8 Electromagnetic susceptibility	39
6.6 Mechanical specifications	40
7.0 About FIPS	41
8.0 About self-encrypting drives	42
8.1 Data encryption	42
8.2 Controlled access	42
8.2.1 Admin SP	42
8.2.2 Locking SP	42
8.2.3 Default password	42
8.3 Random number generator (RNG)	42
8.4 Drive locking	42
8.5 Data bands	43
8.6 Cryptographic erase	43
8.7 Authenticated firmware download	43
8.8 Power requirements	43
8.9 Supported commands	43
8.10 Sanitize - CRYPTOGRAPHIC ERASE	43
8.11 RevertSP	43
9.0 Defect and error management	44
9.1 Drive internal defects/errors	44
9.2 Drive error recovery procedures	44
9.3 SAS system errors	45
9.4 Background Media Scan	45
9.5 Media Pre-Scan	45
9.6 Deferred Auto-Reallocation	46
9.7 Idle Read After Write	46
9.8 Protection Information (PI)	46
9.8.1 Levels of PI	46
9.8.2 Setting and determining the current Type Level	46
9.8.3 Identifying a Protection Information drive	46
10.0 Installation	47
10.1 Drive orientation	47
10.2 Cooling	47
10.3 Drive mounting	48
10.4 Grounding	48
11.0 Interface requirements	49
11.1 SAS features	49
11.1.1 task management functions	49
11.1.2 task management responses	49
11.2 Dual port support	49
11.3 SCSI commands supported	50
11.3.1 Inquiry data	54
11.3.2 Mode Sense data	55
11.4 Miscellaneous operating features and conditions	59
11.4.1 SAS physical interface	59
11.4.2 Physical characteristics	62
11.4.3 Connector requirements	62
11.4.4 Electrical description	62
11.4.5 Pin descriptions	62
11.4.6 SAS transmitters and receivers	63
11.4.7 Power	63
11.5 Signal characteristics	63
11.5.1 Ready LED Out	63
11.5.2 Differential signals	64
11.6 SAS-2 Specification Compliance	64
11.7 Additional information	64
Numerics	65
A	65
B	65
C	65
D	65
E	66
F	66
G	66
H	66
I	66
J	66
K	66
L	66
M	66
N	67
O	67
P	67
Q	67
R	67
S	68
T	68
U	68
V	68
W	68