Seagate ST160LT007 Momentus Thin (.2-4K) SATA Product Manual - Page 32

6.3 Supported ATA commands The following table lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA: High Speed Serialized AT Attachment specification. See "S.M.A.R.T. commands" on page 33.for details and subcommands used in the S.M.A.R.T. implementation. Command name Command code (in hex) ATA-standard commands Device Configuration Restore B1h/C0h Device Configuration Freeze Lock B1h/C1h Device Configuration Identify B1h/C2h Device Configuration Set B1h/C3h Download Microcode 92h Execute Device Diagnostics 90h Flush Cache E7h Flush Cache Extended EAh Identify Device ECh Initialize Device Parameters 91h Read Buffer E4h Read DMA C8h Read DMA Extended 25h Read DMA without Retries C9h Read Long with Retries 22h Read Long without Retries 23h Read Multiple C4h Read Multiple Extended 29h Read Native Max Address F8h Read Native Max Address Extended 27h Read Sectors 20h Read Sectors Extended 24h Read Sectors without Retries 21h Read Verify Sectors 40h Read Verify Sectors Extended 42h Read Verify Sectors without Retries 41h Seek 70h Set Features EFh Set Max Address F9h Note: Individual Set Max commands are identi- Address: 00H fied by the value placed in the Set Max Fea- Password: 01H tures register as defined to the right. Lock: 02H Unlock: 03H Freeze Lock: 04H Set Multiple Mode C6h S.M.A.R.T. Disable Operations B0h/D9h S.M.A.R.T. Enable/Disable Autosave B0h/D2h 26 Momentus Thin Product Manual, Gen-2 Rev. D