Sennheiser MEB 114 Instruction Manual SpeechLine Wired - Page 32

Adjusting and using the products Adjusting and using the products MEB 114 MEB 114-S Adjusting the microphone sensitivity ̈ Use the mixing console, the auto mixer or the DSP to adjust the microphone sensitivity so that over- or under-modulation is avoided. For more information on the audio settings, refer to the instruction manual of the corresponding device. If interference occurs at high field strengths, remove the source of interference from the microphone. Activating/deactivating the low-cut filter on the MEB 114 (-S) A table or lectern transfers the sound produced when a speaker accidentally stumbles against it. The low-cut filter reduces low-frequency noise by filtering out frequencies below 120 Hz. ̈ Set the slide switch to the desired position: Low-cut filter is deactivated Low-cut filter is activated SpeechLine IS microphone series | 31