Home » Sennheiser Manuals » Headphones » Sennheiser MEB 114 » Manual Viewer

Sennheiser MEB 114 Instruction Manual SpeechLine Wired - Page 39

Specifications, IS microphone series, MIC IN, MIC OUT, SWITCH, Dimensions W x H x D

Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Specifications MAS 133 inline switch box MAS 133 Power supply 48 V phantom power (P48) via MIC IN Slide switch for setting the ON | PTM | PTT | ON/OFF behavior of the microphone button Logic output high level output voltage > 2.4 V | low level output voltage < 0.4 V Connections MIC IN: XLR-3F | MIC OUT: XLR-3M | SWITCH: XLR-5F | 3x terminal Weight approx. 212 g Dimensions (W x H x D) approx. 150 x 44 x 44 mm Temperature operation: -10 °C (14 °F) to +50 °C (122°F) storage: -25 °C (-13°F) to +70 °C (158°F) MAS 1 microphone button Power supply Current consumption Connection Weight Dimensions Temperature MAS 1 12 V (max. 1.5 mA) signal light ring: 3 mA XLR-5M approx. 59 g total height: approx. 81 mm installation height: approx. 8 mm Ø-head of microphone button: approx. 29 mm Ø-threaded bolt: approx. 20 mm Ø-rubber rings: approx. 23 mm thread size: M20 x 1.5 operation: -10 °C (14 °F) to +50 °C (122°F) storage: -25 °C (-13°F) to +70 °C (158°F) 38 | SpeechLine IS microphone series

Section	Page
Important safety information	3
Sennheiser SpeechLine – True to the word	4
Typical applications	4
Typical ways of setting up and installing microphones	5
Pick-up patterns of the microphones	7
Positioning the microphones	7
Typical acoustic situations	9
Overview of the SpeechLine IS microphone series	10
Package contents	11
Package contents of the microphones \| microphone heads	11
Package contents of the tables stands \| floors stands \| microphone mounts	12
Package contents of the inline switch box \| microphone button	12
Product overview	13
Overview of the MEB 114 (-S) boundary layer microphones	13
Overview of the MEB 102 (-L) \| MEB 104 (-L) surface-mounted boundary layer microphones	14
Overview of the MEG 14-40 (-L(-II)) gooseneck microphones	14
Overview of the MZH 30xx (-L) goosenecks	15
Overview of the MAT 133 (-S) \| MAT 153-S table stands	15
Overview of the MAS 133 inline switch box	16
Overview of the MAS 1 microphone button	16
Overview of the MZFS 60 \| MZFS 80 microphone stands	16
Mounting and installing the products	17
Planning the position of surface-mounted products	17
Mounting surface-mounted boundary layer microphones, microphone buttons, switch boxes: table \| lectern	19
Mounting the gooseneck microphones: table \| lectern \| stand	21
Mounting microphones to the ceiling	23
Positioning mobile microphones	26
Connecting the products	27
Connecting the products to an audio input	27
Connecting products via the logic function	29
Adjusting and using the products	32
Adjusting the microphone sensitivity	32
Activating/deactivating the low-cut filter on the MEB 114 (-S)	32
Setting the behavior of the microphone button	33
Activating/muting microphones	34
Cleaning and maintaining the products	35
Specifications	36
Product specifications	36
Pin assignment	41
Polar diagrams	42
Frequency response curves	44