Sennheiser MEB 114 Instruction Manual SpeechLine Wired - Page 34

Adjusting and using the products MEG 14-40 MEG 14-40-L-II MZH 30xx MEB 114-S MAS 1 Activating/muting microphones The products shown on the left have LEDs that indicate whether the microphone is muted or activated. The LEDs light up as soon as the products are powered via the mixing console, the auto mixer or the DSP. Whether a microphone is permanently activated or muted or whether it can be activated or muted by pressing the microphone button depends on the setting of the slide switch that sets the behavior of the microphone button (see page 32). When the slide switch is set to ON, the microphone is permanently activated and the microphone button is deactivated. ̈ Press the microphone button, the LED lights up: ... green Microphone is active ... red* Microphone is muted MEB 114-S MAT 133-S + MZH 30xx + MEG 14-40 MAS 1 MAT 153-S + MEG 14-40-L-II * This function is not supported by all mixing consoles, auto mixers and DSPs. The signal light rings of the microphones light up synchronously with the signal light rings of the microphone buttons. SpeechLine IS microphone series | 33