Sennheiser MEB 114 Instruction Manual SpeechLine Wired - Page 37

Specifications Surface-mounted boundary layer microphones Pick-up pattern Frequency response Acoustic principle Output impedance at 1kHz Sensitivity Max. sound pressure level Equivalent noise level A-weighted as per DIN IEC 61672 Power supply Current consumption Connector Weight Dimensions Temperature MEB 102 MEB 102 MEB 102-L MEB 102-L MEB 104 MEB 104 MEB 104-L MEB 104-L omni-directional cardioid 40 - 20,000 Hz boundary layer microphone 200 Ω 16 mV/Pa 14 mV/Pa 125 dB at 1 kHz < 3% 21 dB (A) 28 dB (A) 24 - 48 V phantom power (P 24 - P 48) 3 mA 6 mA 3 mA 6 mA (microphone/ signal light ring: 3 mA each) (microphone/ signal light ring: 3 mA each) XLR-3M XLR-5M XLR-3M XLR-5M approx. 59 g approx. 60 g installation height: approx. 12 mm installation height: approx. 19 mm total height: approx. 83 mm total height: approx. 90 mm Ø microphone head: approx. 29 mm Ø threaded bolt: approx. 20 mm thread size: M20 x 1.5 Ø rubber rings: approx. 23 mm operation: -10 °C (14 °F) to +50 °C (122°F) storage: -25 °C (-13°F) to +70 °C (158°F) Gooseneck microphones Pick-up pattern Acoustic principle Power supply Current consumption Connector Temperature MZH 30xx MZH 30xx-L MZH 30xx MZH 30xx-L depending on ME 3x mic head gooseneck microphone (condenser) 12 V - 48 V phantom power (P 12 - P 48) 3 mA 18 mA (microphone/signal light ring: 9 mA each) XLR-3M XLR-5M operation: 0 °C (32 °F) to +40 °C (104 °F) storage: -25 °C (-13°F) to +70 °C (158°F) 36 | SpeechLine IS microphone series