Sennheiser SKM 5200 Instructions for use - Page 16

After switch-on After switch-on, the standard display is shown on the display panel. Depending on the setting, the transmission frequency, the channel number or the name of the radio microphone is displayed. Displaying the menu settings in display mode In display mode, and with the lock mode activated, you can display the current menu settings one after the other (see "Overview of the operating menu" on page 21). After a few seconds, the display returns to the standard display. With the lock mode activated, the LC display is not backlit. UP SET DOWN ̈ Slide the multi-function switch ¶ to the position ̆ (UP) or ̄ (DOWN) to display the menu settings. If you slide ¶ the multi-function switch repeatedly to the same position, all menu settings are displayed one after the other. Changing to the selection mode To change from display mode to selection mode, you have to deactivate the lock mode. ̈ Deactivate the lock mode (see "Deactivating the autolock function temporarily" on page 16). You can now select the menu whose settings you want to adjust. ̈ Press the multi-function switch ¶ (switch position țSET) to change to the menu that was displayed in display mode. Selecting a menu UP SET ¶ DOWN ̈ Slide the multi-function switch ¶ to the position ̆ (UP) or ̄ (DOWN). ̈ Press the multi-function switch ¶ (switch position țSET). The name of the selected menu starts flashing. 18