Sennheiser SKM 5200 Instructions for use - Page 23

Entering a name - NAME Via the "NAME" menu, you can enter a freely selectable name for the radio microphone. This name can be displayed on the standard display and can consist of up to six characters such as: y letters (without pronounciation marks), y numbers from 0 to 9, y special characters and spaces. After you have changed to the setting mode of the "NAME" menu, the first segment starts flashing on the display. UP SET DOWN ̈ Slide the multi-function switch ¶ to the position ̆ (UP) or ̄ (DOWN) to select a character. ¶ (By sliding the switch only once, the display jumps either forwards or backwards to the next character. If you keep the switch slid, the display starts cycling continuously.) ̈ Press the multi-function switch ¶ (switch position țSET) to change to the next segment. ̈ Have you entered the name completely? Press the multifunction switch ¶ (switch position țSET) to store your setting. "STORED" appears on the display panel. Adjusting the microphone sensitivity - ATTEN Via the "ATTEN" menu, you can adjust the radio microphone's sensitivity by changing its input attenuation. ቩ The input attenuation is correctly adjusted when the level display for audio RF signal "AF" ቩ shows full deflection only dB AF during the loudest passages. The input attenuation can be adjusted in 1-dB steps from -40 dB to 0 dB. 25