Sennheiser SKM 5200 Instructions for use - Page 21

Adjustment tips for the operating menu Selecting a channel - CHAN Via the "CHAN" menu, you can switch between the channels in the channel banks "FIX" and "VAR". The radio microphone is not transmitting while this adjustment is being made. When changing to the setting mode of the "CHAN" menu, the current channel number appears on the display. After approx. 1 second, the currently assigned frequency is displayed. 1 sec. CH CCHH MHz ̈ To select a different channel, slide the multi-function switch to the position ̆ (UP) or ̄ (DOWN). The new channel number appears on the display panel for approx. 1 second and then the currently assigned frequency is displayed. Only after the new setting has been stored ("STORED" has appeared on the display panel) does the transmitter operate on the transmission frequency of the new channel. Selecting the frequencies to be stored in the channel bank "VAR" - TUNE Via the "TUNE" menu, you can freely select the frequencies to be stored in the channel bank "VAR" (variable bank). The radio microphone is not transmitting while this adjustment is being made. Note: When you have selected the channel bank "FIX" and then select the "TUNE" menu, the radio microphone automatically switches to channel 01 of the channel bank "VAR" and "VAR" briefly appears on the display panel. The transmission frequencies are tunable in 5-kHz steps within a switching bandwidth of 36 MHz max. Note: When operating a multi-channel system, make sure to only use intermodulation-free frequencies. 23