Sennheiser XSW 1-825 Instruction manual - XS Wireless 1 & XS Wireless 2 PD - Page 61
Installing receivers in a rack
View all Sennheiser XSW 1-825 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
EM-XSW 2 rack receiver Installing receivers in a rack CAUTION Rack mounting poses risks When installing the device in a closed 19" rack or multi-rack assembly, please consider that, during operation, the ambient temperature, the mechanical load and the electrical potentials will be different from those of devices which are not mounted into a rack. ▷ Make sure that the ambient temperature within the rack does not exceed the permissible temperature limit stated in the specifications. See „SPECIFICATIONS". ▷ Ensure sufficient ventilation; if necessary, provide additional ventilation. ▷ Make sure that the mechanical load of the rack is even. ▷ When connecting to the power supply system, observe the information indicated on the type plate. Avoid overloading the circuits. If necessary, provide overcurrent protection. ▷ When mounting in a rack, please note that intrinsically harmless leakage currents of the individual power supply units may accumulate, thereby exceeding the permissible limit value. As a remedy, ground the rack via an additional ground connection. To mount the receiver in a rack, you will need the GA 1-XSW 2 rack mount kit (see „Accessories"). 60