Sennheiser XSW 1-825 Instruction manual - XS Wireless 1 & XS Wireless 2 PD - Page 93
Cleaning and maintenance
View all Sennheiser XSW 1-825 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Cleaning and maintenance Cleaning and maintenance Note the following information when cleaning and maintaining products of the Evolution Wireless Digital series. CAUTION Liquids can damage the products' electronics. Liquids entering the product housing can cause a short-circuit and damage the electronics. ▷ Keep all liquids away from the products. ▷ Do not use any solvents or cleansing agents. ▷ Disconnect the products from the power supply system and remove rechargeable batteries and batteries before you begin cleaning. ▷ Clean all products only with a soft, dry cloth. ▷ Note the special cleaning instructions below for the following products. Cleaning the sound inlet basket of the microphone module ▷ Unscrew the top sound inlet basket from the microphone module by turning it counterclockwise. ▷ Remove the foam insert. You can clean the sound inlet basket in two ways: • Use a slightly damp cloth to clean the top sound inlet basket from the inside and outside. • Use a brush and rinse with clean water. ▷ If necessary, clean the foam insert with a mild detergent or replace the foam insert. ▷ Dry the top sound inlet basket and foam insert. ▷ Reinsert the foam insert. ▷ Screw the sound inlet basket back onto the microphone module. 92