Sennheiser ew 300 Instructions for Use - Page 59
Selecting the content of the standard display, Name EM 300 only
View all Sennheiser ew 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
DISPL DiSPL Selecting the content of the standard display With all transmitters and receivers you can choose the content of the standard display i.e. whether the frequency, the channel number or a name is displayed (the latter option is only possible with the EM 300 receiver). Ǡ Select the "DISPL" menu by pressing the SET button until "DISPL" appears on the display; after a short pause the current setting is displayed. Ǡ With the ̆/̄ buttons you can now choose between: Name (EM 300 only): Frequency: Channel number: "NAME" "FREQU" "CHANNL" The new setting for the standard display starts flashing on the display. Ǡ Press the SET button to return to the top menu level. The display then switches to the new standard display. 59
59
DISPL
DiSPL
Selecting the content of the standard display
With all transmitters and receivers you can choose the content of the standard
display i.e. whether the frequency, the channel number or a name is displayed
(the latter option is only possible with the EM 300 receiver).
±
Select the “
DISPL
” menu by pressing the
SET
button until “
DISPL
”
appears on the display; after a short pause the current setting is
displayed.
±
With the
±
/
²
buttons you can now choose between:
Name (EM 300 only):
“
NAME
”
Frequency:
“
FREQU
”
Channel number:
“
CHANNL
”
The new setting for the standard display starts flashing on the display.
±
Press the
SET
button to return to the top menu level. The display
then switches to the new standard display.