Sharp AR-162S AR-162S Operation Manual - Page 13
Changing the copy paper size in the tray
View all Sharp AR-162S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
LOADING COPY PAPER GETTING STARTED GETTING STARTED Loading copy paper Left guide Changing the copy paper size in the tray 1 Gently lift and pull out the paper tray until it stops. 2 Push the pressure plate down until it locks in place. 3 Squeeze the lock lever of the front guide and slide the front guide to match the width of the paper. 4 Move the left guide to the appropriate slot as marked on the tray. Front guide G When using 11" x 17" copy paper, store the left guide in the slot at the left front of the paper tray. 5 Load copy paper into the tray. 6 Place the appropriate label to indicate the selected paper size into the recess on the right front side of the paper tray. 7 Push the paper tray firmly back into the copier. 11
GETTING STARTED
GETTING STARTED
11
GETTING STARTED
Changing the copy paper size in the tray
1
Gently lift and pull out the paper tray until it stops.
2
Push the pressure plate down until it locks in place.
3
Squeeze the lock lever of the front guide and slide the
front guide to match the width of the paper.
4
Move the left guide to the appropriate slot as marked
on the tray.
●
When using 11" x 17" copy paper, store the left guide in the slot at
the left front of the paper tray.
5
Load copy paper into the tray.
6
Place the appropriate label to indicate the selected
paper size into the recess on the right front side of the
paper tray.
7
Push the paper tray firmly back into the copier.
Loading copy paper
LOADING COPY PAPER
Front guide
Left guide