Sharp AR-162S AR-162S Operation Manual - Page 32
Misfeed Removal
![]() |
View all Sharp AR-162S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
MISFEED REMOVAL The copier will stop when a misfeed occurs. The misfeed ( ) indicator will blink, and blinking red misfeed location indicators will indicate the approximate misfeed location. If paper is accidentally torn during removal, be sure to remove all pieces. Be careful not to damage the photoconductive drum. For misfeeds in optional equipment, see its section of the operation manual. First confirm the misfeed location. ( P. 56) ( P. 30, 33) STATUS INDICATORS Misfeed removal Misfeed in the bypass tray 1 Gently pull the misfed paper out. 2 Lift slightly on the side cover and slide the cover out until it stops. Close the side cover by pressing the handle on the cover. G The misfeed ( ) indicator will go out. Misfeed in the copier 1 Open the bypass tray. Lift slightly on the side cover and slide the cover out until it stops. 30
![](/manual_guide/products/sharp-ar162s-ar162s-operation-manual-3f15ff3/32.png)