Sharp AR-162S AR-162S Operation Manual - Page 39
and then repeat steps 2 to 5. To exit the user program
![]() |
View all Sharp AR-162S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
USER PROGRAMS GENERAL INFORMATION User programs 4 Select the desired parameter using the numeric keys. G The entered parameter number will blink on the right side of the copy quantity display. G The parameters are shown in the table below. For example, to change the setting of the auto power shut-off timer to 60 min., press key 2. Program name Parameters Auto clear time 0 OFF 1 30 sec. * 2 60 sec. 5 10 sec. 3 90 sec. 4 120 sec. Preheat mode 0 OFF 1 30 sec. 2 60 sec. * 3 90 sec. 4 120 sec. Auto power shut-off timer * 1 30 min. 2 60 min. 3 90 min. 4 120 min. 5 240 min. Stream feeding mode * 0 OFF 1 ON Auto power shut-off setting 0 OFF * 1 ON Factory default settings are indicated with an asterisk (*). If you select "0" (OFF) in a program, the corresponding function will be disabled. 5 Press the START key. G The right-hand number in the copy quantity display will be steadily lit and the entered value will be stored. 6 To continue with other user programs, press the key and then repeat steps 2 to 5. To exit the user program mode, press the light ( ) key. G All the alarm indicators will go out. 37
![](/manual_guide/products/sharp-ar162s-ar162s-operation-manual-3f15ff3/39.png)