Sharp AR-162S AR-162S Operation Manual - Page 50

COPIER TROUBLE? Problem Solution G Is blinking in the copy quantity display? A toner cartridge is not installed. Install a toner cartridge. If "CH" is blinking even if a cartridge is installed properly, contact your SHARP service center immediately. Power is on but copying is not possible. G Is steadily lit in the copy quantity display? G Is the indicator blinking? The side cover is open. Close the front and side covers securely. The toner cartridge must be replaced. See page 28, TONER CARTRIDGE REPLACEMENT. G Is the indicator blinking? A misfeed has occurred. See page 30, MISFEED REMOVAL. G Is the same power outlet used for Connect the copier to a power outlet which is Lighting fixture flickers. the lighting fixture and the copier? not used for other electric appliances. Be sure to use only genuine SHARP parts and supplies. Please contact your SHARP service center immediately if a problem persists after checking the above. Self-diagnostic function An automatic self-diagnostic function is built into the copier. Should the copier malfunction, the self-diagnostic function will locate the problem and stop the copier to prevent damage. An alphanumeric code will appear in the copy quantity display. Example Should the copier completely stop and a letter and a number appear alternately, contact your SHARP service center immediately. GENERAL INFORMATION Copier trouble? 48