Sharp AR M277 AR-M237 AR-M277 Operation Manual Suite - Page 212

USING THE KEY OPERATOR PROGRAMS When using the key operator programs for the first time, change the factory default key operator code to a new Note code. (Step 3 to step 6) 1 Press the [CUSTOM SETTINGS] key. B STATUS LINE DATA CUSTOM SETTINGS 2 Touch the [KEY OPERATOR PROGRAMS] key. CUSTOM SETTINGS TOTAL COUNT TRAY SETTINGS KEYBOARD SELECT DISPLAY CONTRAST ADDRESS CONTROL LIST PRINT RECEIVE MODE KEY OPERATOR PROGRAMS EXIT CLOCK FAX DATA FORWARD 3 Use the numeric keys to enter the five-digit key operater code. Each time a digit is entered, the dash (-) that KEY OPERATOR CODE indicates the digit will change to an asterisk ( ). The factory default setting for the key operator code is 00000. 4 Touch a key to select the desired category of key operator programs. KEY OPERATOR PROGRAMS ACCOUNT CONTROL ENERGY SAVE COPY SETTINGS PRINT SETTINGS LIST PRINT KEY OPERATOR CODE CHANGE OPERATION SETTINGS SCANNER SETTINGS PRODUCT KEY EXIT DEVICE CONTROL FAX SETTINGS 5 Use the numeric keys to enter the new 5-digit key operator code. Use a number for the key operator code that has not been programmed as an 00000 ----- account number for auditing mode (a number that has been programmed as an account number cannot be used). The entered number will be the new key operator code. Be sure to remember this number. 6 Touch the [OK] key. You will return to the screen of step 4. This completes the procedure for changing OK the key operator code. If you wish to configure another program, touch the key of the desired program in the screen of step 4. 7 Press the [CLEAR ALL] key ( ) to exit the program. Example: To change the key operator code, touch the [KEY OPERATOR CODE CHANGE] key. • Each time you need to configure a program, use this procedure to select the program. • In the following steps, the setting screen for the selected program appears. Refer to the explanation of the program to select the desired setting (the explanations of the programs begin on page 96). 94