Sharp BDHP21U BD-HP21U Operation Manual - Page 23

Before Starting Playback Setting the Remote Control Code • 3 types of remote control codes operate this Player: RC-1, RC-2 and RC-3. If you operate this Player by remote control along with another SHARP Blu-ray Disc Player or DVD Player placed next to it simultaneously, switching the remote control code (both the Player and remote control) to one of the signals (RC-1, RC-2 or RC-3) will let you operate only with this Player. • Make sure to set the Player and remote control to the same remote code. You can not operate the Player if they are not set to the same code. Setting the Remote Control Code of the Remote Example: Setting the code to "RC-3". 1 Press and hold 3 first and then POWER on the remote control together for more than 5 seconds. 2 Press POWER to turn off the player. POWER If remote control does not work First, press POWER to turn on this player. Press POWER on the remote control and check the front panel display (RC-1, RC-2 or RC-3). Set the remote control code according to the display and press POWER to see if you can turn on/off the Player. Operating a SHARP TV Using the Remote Control The Universal Remote Control may operate the basic functions of the SHARP TV. TV function control • TV Power: POWER • TV Channel up/down: CH r/s • TV Volume up/down: VOL e/f • TV-AV Selector: INPUT Setting the Remote Control Code of the Player 3 Point the remote control at the player, then press and hold the DISPLAY button. Remote control sensor The display on the player changes as shown below, and the player will be set to the same number as the remote control. Example: Change "RC-1" to "RC-3". Approx. 2 sec. later Approx. 3 sec. later p Disc Playback 21