Sharp BDMPC41 BD-MPC41U Operation Manual - Page 64
Listening to the FM Broadcast, Tuning, Receiving Stereo FM Broadcasts, Presetting a Station
View all Sharp BDMPC41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Listening to the FM Broadcast Buttons under the cover Presetting a Station You can preset up to 20 FM stations and recall them by pressing PRESET c/d. 1 Perform Steps 1 to 2 in "Tuning" on the left. 2 Press ENTER to enter the channel presetting mode. Tuning 1 Press SELECTOR on the main unit or FM on the remote control as many times as required to select the desired band. • Each time FM is pressed, the setting changes between "FM STEREO" and "FM MONO". 2 Press TUNING a/b to tune in to the desired station. Manual tuning Press TUNING a/b as many times as required to tune in to the desired station. Auto tuning When TUNING a/b is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. NOTE • When FM broadcast interference occurs, auto scan tuning may stop automatically at that point. • Auto scan tuning will skip stations with a weak signal. • To cancel auto tuning, press TUNING a/b again or press ENTER. Receiving Stereo FM Broadcasts Press FM to select stereo mode. The "STEREO" indicator will be displayed. • " " will appear when an FM broadcast is in stereo. • If FM reception is weak, press FM to turn off the "STEREO" indicator. The reception changes to monaural, and the sound becomes clearer. FM stereo receiving indicator 3 Within 3 seconds, press PRESET c/d to select the preset channel number. • Preset the stations, in order, starting with preset channel 1. 4 Within 3 seconds, press ENTER to preset that station. • If the preset number indicators disappear before the station is preset, repeat the operation from Step 2. • When a new station is stored in memory, the station previously memorized for that preset channel number will be erased. NOTE • If the AC power cord is unplugged or a power failure lasts for more than two or three hours, the preset station settings will be lost. If this happens, preset the stations again. Recalling a preset station Press PRESET c/d to select the desired preset station. Clearing all preset stations Press CLEAR for more than three seconds until "CLEAR" appears. FM stereo mode indicator 62