Sharp BDMPC41 BD-MPC41U Operation Manual - Page 84
Troubleshooting, Network, AQUOS LINK, Other, Is the AQUOS TV set to By AQUOS AUDIO SP mode?
![]() |
View all Sharp BDMPC41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Troubleshooting Network Problem Possible causes and solutions Cannot connect to the Internet. • Is the LAN cable connected properly? • Is the wrong cable such as a modular cable used? Connect a LAN cable to the ETHERNET terminal. (Page 32) • Is the power for the connected equipment, such as broadband router or modem turned on? • Is the broadband router and/or modem properly connected? • Is the proper value(s) set in the network setting? Check "Communication Setup". (Pages 71-73) Cannot download BD-LIVE contents. • Is the LAN cable connected properly? • Is the USB memory device properly connected? Check that the USB memory device is connected to the USB1 or USB2 termial on this system. • Check if the BD disc supports BD-LIVE. • Check the setting for "BD Internet Access". (Page 70) AQUOS LINK Problem Possible causes and solutions AQUOS LINK function does not work properly. • Is the HDMI cable properly connected? Connect the HDMI cable correctly and then perform the reset procedure. (Page 83) • Try switching the input manually to check whether video from the system is reproduced. AQUOS TV remote control does not operate this system. • Is the AQUOS TV remote control being pointed at the AQUOS TV? • Is the AQUOS TV set to "By AQUOS AUDIO SP" mode? (Page 44) • Is an HDMI CEC-enabled component being used? • Check whether the batteries of the AQUOS TV remote control are still good. Cannot reproduce sound from AQUOS TV with this system. • Are the AQUOS TV audio output and the DIGITAL AUDIO IN (OPTICAL) terminal on this system connected correctly via optical digital cable? (Page 24) • Is the AQUOS TV set to "By AQUOS AUDIO SP" mode? (Page 44) No sound or picture. • Is HDMI compliant equipment being used? • Is the HDMI cable connected correctly? Connect the HDMI cable correctly and then perform the reset procedure. (Page 83) • Do not connect or disconnect an HDMI cable while power is on. This may lead to operation problems and can cause the picture to disappear. Power turns off suddenly. • Is the HDMI cable connected correctly? Connect the HDMI cable correctly and then perform the reset procedure. (Page 83) Switching on this system does not turn on AQUOS TV. • Try setting this system to the playback condition. When playback is activated, power to AQUOS TV should come on. During playback of video media, there is a time lag (lip sync error) between the image on the AQUOS TV and the sound from this system. • Try setting the audio delay function. (Page 63) This will delay the sound reproduced by this system, which serves to reduce the lip sync error. Other Problem The TV operates incorrectly. The system heats up during use. STANDBY indicator will remain lit. When a button is pressed, the system does not respond. The preset channel cannot be recalled. The settings have been erased. 82 Possible causes and solutions • Some TVs with wireless remote control capability may operate incorrectly when using the remote control of this system. Use such TVs away from the main unit. • When using this system, the console cabinet may heat up depending on the usage environment. This is not a malfunction. • When the AC cord is removed from the outlet, the STANDBY indicator will remain lit for a short period. This is normal and is not a malfunction. • Set this system to the stand-by mode and then turn it back on. If the problem still exists, reset it. (Page 83) • Did you remove the plug from the AC outlet, or did a power failure occur? Preset the channel again. • If this system is unplugged (or there is a power failure) for more than about 1 hour while its power is on, the settings will be lost. Make sure that you turn off this system before unplugging the power cord. • When there is a power interruption or the power cord is unplugged from the AC outlet with the power on, all settings return to the factory preset values.
![](/manual_guide/products/sharp-bdmpc41u-bdmpc41u-operation-manual-ed04111/84.png)