Sharp BP-70C45 Quick Start Guide - Page 13

BEFORE USING THE MACHINE LOADING PAPER NAMES AND LOCATIONS OF TRAYS The names of the trays are as follows. (7) (1) (2) (3) (8) (4) (5) (6) (1) Tray 1 (2) Tray 2 (when a stand/550/2x550/3x550/ 550&2100 sheet paper drawer is installed) (3) Tray 3 (when a stand/2x550/3x550 sheet paper drawer is installed) (4) Tray 4 (when a stand/3x550 sheet paper drawer is installed) (5) Tray 3 (when a stand/550&2100 sheet paper drawer is installed) (6) Tray 4 (when a stand/550&2100 sheet paper drawer is installed) (7) Bypass tray (8) Tray 5 (when a large capacity tray is installed) Setting orientation of the print side The setting orientation varies for the print side of paper, depending on the tray used. For "Letter Head" and "Pre-Printed", set the paper in the reverse orientation. Place with the print side facing the direction indicated below. Tray In normal status With letter head or pre-printed paper set Trays 1 - 4 Facing up Facing down Bypass tray, Tray 5 Facing down Facing up 13