Sharp BP-70C45 Quick Start Guide - Page 15
LOADING PAPER IN OTHER TRAYS, Bypass tray
![]() |
View all Sharp BP-70C45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
BEFORE USING THE MACHINE LOADING PAPER IN OTHER TRAYS Bypass tray 1 Open the bypass tray. When loading paper larger than 8-1/2" x 11"R or A4R, pull out the extension guide. Pull the extension guide all the way out. 2 Load the paper with the print side facing down. Insert the paper along the bypass tray guides all the way into the bypass tray until it stops slowly. Inserting the paper with excessive force may cause the leading edge to fold back. Inserting the paper too loosely may cause skewed feeding or misfeeds. The paper must not exceed the maximum number of sheets and must not be higher than the indicator line. 3 Set the bypass tray guides correctly to the width of the paper. Adjust the bypass tray guides so that they slightly contact the loaded paper. Loading envelopes Only the front side of envelopes can be printed or copied on. Place the front side facing down. When placing C4, C5, or C6 Flap Place the front side facing down. When loading envelopes in the bypass tray, set the paper type. ► CHANGE THE SETTING OF THE PAPER TRAY (page 18) Place the front side facing down. 15
![](/manual_guide/products/sharp-bp50c26-quick-start-guide-ad3bc11/15.png)