Sharp CD-DH790N CD-DH790N Operation Manual - Page 19
Timer and sleep operation Remote control only continued
![]() |
UPC - 074000369627
View all Sharp CD-DH790N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Timer and sleep operation (Remote control only) (continued) 12 When the timer end time is reached, the system will enter the power stand-by mode automatically. Once timer: The timer will be canceled. Daily timer: The timer operates at the same time every day. It will continue until the daily timer setting is canceled. Cancel the daily timer when it is not in use. Notes: ● When performing timer playback using another unit connected to the USB terminal or AUDIO IN jack, select "USB" or "AUDIO IN" in step 8. ● This unit will turn on or enter the power stand-by mode automatically. However, the connected unit will not turn on or off. To stop the timer playback, follow step "Cancelling the timer setting" of this page. Checking the timer setting: 1 Turn the power on and press and hold down the CLOCK/TIMER button. 2 Within 10 seconds, press the or button to select "ONCE SET" or "DAILY SET", and press the MEMORY button. 3 Within 10 seconds, press the or button to select "TIMER CALL", and press the MEMORY button. Cancelling the timer setting: 1 Turn the power on and press and hold down the CLOCK/TIMER button. 2 Within 10 seconds, press the or button to select "ONCE SET" or "DAILY SET", and press the MEMORY button. 3 Within 10 seconds, press the or button to select "TIMER OFF", and press the MEMORY button. Timer will be canceled (the setting will not be canceled). Reusing the memorized timer setting: The timer setting will be memorized once it is entered. To reuse the same setting, perform the following operations. 1 Turn the power on and press and hold down the CLOCK/TIMER button. 2 Within 10 seconds, press the or button to select "ONCE SET" or "DAILY SET", and press the MEMORY button. 3 Within 10 seconds, press the or button to select "TIMER ON", and press the MEMORY button. 4 Press the ON/STAND-BY button to enter the power stand-by mode. ■ Sleep operation The radio, compact disc, iPod and USB can all be turned off automatically. 1 Play back the desired sound source. 2 Press the SLEEP button. 3 Within 10 seconds, press the SLEEP button repeatedly to select the time. 10 20 30 ....... 80 90 4 "SLEEP" will appear. 5 The unit will enter the power stand-by mode automatically after the preset time has elapsed. The volume will be turned down 1 minute before the sleep operation finishes. To confirm the remaining sleep time: 1 While "SLEEP" is indicated, press the SLEEP button. To cancel the sleep operation: Press the ON/STAND-BY button while "SLEEP" is indicated. To cancel the sleep operation without setting the unit to the stand-by mode, proceed as follows. 1 While "SLEEP" is indicated, press the SLEEP button. 2 Within 10 seconds, press the SLEEP button repeatedly to select "SLEEP 00". ■ To use timer and sleep operation together Sleep and timer playback: For example, you can fall asleep listening to the radio and wake up to CD in the next morning. 1 Set the sleep time (see above, steps 1 - 5). 2 While the sleep timer is set, set the timer playback (steps 2 - 9, page 17). Sleep timer Timer playback End setting setting time 90 minutes Sleep operation will automatically stop Desired time Timer playback start time E-18
![](/manual_guide/products/sharp-cddh790n-cddh790n-operation-manual-4db8b86/19.png)