Sharp DM 2010 Operation Manual - Page 28
Automatic Exposure Adjustment
UPC - 740000737840
View all Sharp DM 2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
MAKING COPIES Automatic exposure adjustment AUTOMATIC EXPOSURE ADJUSTMENT The automatic exposure level can be adjusted to suit your copying needs. This level is set for copying from the original table and copying from the optional SPF respectively. To set the level for the optional SPF, place an original in the document feeder tray and make sure that the SPF indicator lights up before proceeding to step 1. To set the level for the original table, ensure that the SPF indicator does not light up. 1 Press the AUTO/MANUAL/PHOTO key to select the PHOTO mode. 2 Press and hold down the AUTO/MANUAL/PHOTO key for approximately 5 seconds. ● The PHOTO indicator will go out and the AUTO indicator will begin to blink. ● One or two exposure indicators corresponding to the current automatic exposure level will light up. The factory default setting is level "3". 3 Press the light ( ) or dark( ) key to lighten or darken the automatic exposure level as desired. 4 Press the AUTO/MANUAL/PHOTO key. ● The AUTO indicator will stop blinking and will light up steadily. ● This automatic exposure level will remain in effect until you change it again by this procedure. 26