Sharp DM 2010 Operation Manual - Page 42
USER PROGRAMS, Program No. 10, Auditing mode, Program No. 11, Account number entry
UPC - 740000737840
View all Sharp DM 2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
USER PROGRAMS Settings for auditing accounts Setting of user programs No. 10 to 15 varies with the program number. For settings of all programs, first follow steps 1 to 3 in "Setting the user programs" on page 38 to select a program. (1. Press the light ( ) key for more than 5 seconds. 2. Enter a program number (10 to 15) using the numeric keys. 3. Press the START key.) Then follow the appropriate instructions for the program. Program No. 10: Auditing mode If the auditing mode is enabled, copying is limited to operators with an assigned 3-digit account number. A maximum of 20, 3-digit account numbers can be assigned. Use program No. 11 to register account numbers. When program No. 10 is entered, the current setting (0: OFF, 1:ON) will blink on the right side of the copy quantity display. 1. Select the desired setting using the numeric keys. 0: OFF 1: ON 2. Press the START key. ● The setting will be stored. 3. To continue with other user programs, press the key and enter another program number. To exit the user program mode, press the light ( ) key. Program No. 11: Account number entry Program No. 11 is used to register accounts. When program No. 11 is entered, "---" will blink in the copy quantity display. ● If the number of accounts has reached the upper limit (20), "11E" will appear in the copy quantity display. Press the key. The copier will return to step 2 on page 38. 1. Enter a 3-digit account number using the numeric keys. ● Any 3-digit number except "000" can be registered as an account number. 2. Press the START key. ● If a number that is already registered or "000" is entered, the number will blink in the copy quantity display. 3. Repeat steps 1 and 2 for other account numbers. 4. To continue with other user programs, press the key and enter another program number. To exit the user program mode, press the light ( ) key. 40 GENERAL INFORMATION User programs