Sharp DM 2010 Operation Manual - Page 62

ELECTRONIC SORTING KIT (AR-EB3) If an electronic sorting kit (AR-EB3) is installed, the copier can perform several additional useful functions. These functions are 2 in 1 and 4 in 1, erase, margin shift, and sort/group functions. Also, rotation copying can be performed and a multiple number of originals can be scanned and stored into the memory. The memory can be expanded by adding commercially available memories recommended by SHARP. For details, contact your dealer. To use the 2 in 1 or 4 in 1 and sort/group functions, an optional single pass feeder (AR-SP2) is needed. When installing an electronic sorting kit, it is recommended to install a single pass feeder. Rotation copying If user program No. 7 is set, the image of the original will rotate when the orientation of the original does not match that of the copy paper. Rotation copying will function only if the auto paper select mode or auto copy ratio mode has been selected. Even if user program No. 7 is not set, rotation copying will function when the 2 in 1 or 4 in 1 function is selected. However, if enlargement copying onto a paper size larger than A4 is performed, the image cannot be rotated. When this occurs, the detected size and orientation of the original will be indicated by a steadily lighted indicator and a flashing indicator will show the required orientation of the original. The original must be rotated 90° to match the flashing indicator to prevent image loss on the copies. See page 38. Example: Copying from an A3 original onto A4 paper Original Paper Copy Electronic sorting kit (AR-EB3) OPTIONAL EQUIPMENT 60