Sharp DM 2010 Operation Manual - Page 67
Erase
UPC - 740000737840
View all Sharp DM 2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Erase Edge erase AA Centre erase A B A B Edge + Centre erase AB AB ELECTRONIC SORTING KIT (AR-EB3) This copier has an edge erase mode and a centre erase mode. ● Edge erase can be used to eliminate shadow lines around the edges of copies caused when thick paper or a book is used as an original. ● Centre erase can be used to eliminate the shadow produced by the bindings of bound documents. ● Edge + centre erase can be used to eliminate shadow lines around the edges of copies and to eliminate the shadow at the centre of copies. ● The erase width can be set from 0 to 20 mm in five steps using user program No. 16. See page 37. ● This feature cannot be used with the 2 in 1 or 4 in 1 feature. Electronic sorting kit (AR-EB3) OPTIONAL EQUIPMENT 1 Place the original on the original table and close the platen cover. ● If an optional single pass feeder (SPF) is installed, it can also be used for this feature. 2 Press the ERASE key to select the desired erase mode. ● To select the EDGE + CENTRE ERASE mode, press the ERASE key until both the EDGE and CENTRE indicators light up. 3 Ensure that the desired copy paper size is selected. ● If non-standard size paper or the bypass tray is used, the paper will be regarded as A3 size paper and the erase area will not be proper if the paper size is not A3. 65