Sharp DM 2010 Operation Manual - Page 41
mode, press the light
![]() |
UPC - 740000737840
View all Sharp DM 2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
USER PROGRAMS GENERAL INFORMATION User programs 4 Select the desired parameter using the numeric keys. ● The entered parameter number will blink on the right side of the copy quantity display. ● The parameters are shown in the table below. For example, to change the setting of the auto power shut-off timer to 60 min., press key 2. Program name Parameters Auto clear time 0 e OFF 5 e 10 sec. 1 e 30 sec. Preheat mode 0 e OFF 1 e 30 sec. Auto power shut-off timer * 1 e 30 min. 2 e 60 min. Stream feeding mode * 0 e OFF 1 e ON Auto power shut-off setting 0 e OFF * 1 e ON Border line for 2 in 1 or 4 in 1 * 0 e OFF 1 e ON Rotation copy 0 e OFF * 1 e ON Auto paper select mode 0 e OFF * 1 e ON Auto tray switching 0 e OFF * 1 e ON Erase width adjustment 0 e 0 mm 1 e 5 mm Layout in 2 in 1 copy * 1 e Pattern 1 2 e Pattern 2 Layout in 4 in 1 copy * 1 e Pattern 1 2 e Pattern 2 Offset of paper output tray 0 e Upper OFF, lower OFF 2 e Upper ON, lower OFF * 2 e 60 sec. 3 e 90 sec. 2 e 60 sec. * 3 e 90 sec. 3 e 90 min. 4 e 120 min. * 2 e 10 mm 3 e 15 mm 3 e Pattern 3 4 e Pattern 4 * 1e Upper ON, lower ON 3 e Upper OFF, lower ON 4 e 120 sec. 4 e 120 sec. 5 e 240 min. 4 e 20 mm Factory default settings are indicated with an asterisk (*). For layout in 2 in 1 copy and 4 in 1 copy, see page 63. If you select "0" (OFF) in a program, the corresponding function will be disabled. 5 Press the START key. ● The right-hand number in the copy quantity display will be steadily lit and the entered value will be stored. 6 To continue with other user programs, press the key and then repeat steps 2 to 5. To exit the user program mode, press the light ( ) key. ● All the alarm indicators will go out. 39
![](/manual_guide/products/sharp-dm-2000-operation-manual-f788b50/41.png)