Sharp DT 100 DT-100 Operation Manual - Page 24
Connecting to Video Equipment, Connections
![]() |
UPC - 074000364684
View all Sharp DT 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Connecting to Video Equipment Before connecting, ensure that the power cord of the projector is unplugged from the AC outlet and turn off the devices to be connected. After making all connections, turn on the projector first and then the other devices. The projector is equipped with input terminals that support component, S-video, and video signals. See the illustration below to connect with the audio-visual equipment. The image quality is highest in the order of the component signal, the S-video signal and the video signal. If your audio-visual equipment has a component output terminal, use the COMPUTER/ COMPONENT terminal (INPUT1 or INPUT 2) on the projector for video connection. When connecting to equipment with component output terminal (INPUT1 or INPUT2) To audio output terminal To component output (Y, CB/PB, CR/PR) terminal DVD, etc. Supplied accessory 3 RCA to 15-pin D-sub adaptor To INPUT1 terminal To AUDIO (INPUT1, 2) terminal ø3.5 mm minijack to RCA audio cable* (commercially available) *Use the cable when you want to enjoy the sound from the projector's speaker. Component cable (commercially available) 3 RCA to 15pin D-sub adaptor Connections 23
![](/manual_guide/products/sharp-dt-100-dt100-operation-manual-bd57dcc/24.png)