Sharp DT 100 DT-100 Operation Manual - Page 44

Adjusting the Projected Image ("SCR - ADJ" menu) Picture SCR - ADJ PRJ - ADJ 1 Resize 2 Keystone 3 OSD Display 4 Background 5 PRJ Mode 6 Language Stretch 0 On Logo Front English Menu operation n Page 39 Help 1 Setting the Resize Mode Note • For details of the Resize mode, see pages 34 and 35. • You can also press HRESIZE on the remote control to set the resize mode. (See page 34.) 4 Selecting the Background Image Selectable items Logo Blue None Description Sharp logo screen Blue screen - 2 Keystone Correction When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trapezoidal distortion is called Keystone Correction. Select "Keystone" on the "SCR-ADJ" menu and adjust with the slide bar. Q or P button O or R button See page 33 for details of Keystone Correction. 5 Reversing/Inverting Projected Images Selectable items Front Ceiling + Front Rear Ceiling + Rear Description Normal image (Projected from the front of the screen) Inverted image (Projected from the front of the screen with an inverted projector) Reversed image (Projected from the rear of the screen or with a mirror) Reversed and inverted image (Projected with a mirror) See page 19 for details of Projection (PRJ) Mode. Note • The Keystone Correction can be adjusted up to an angle of approximately ±13 degrees (when "Resize" is set to "Stretch"). 3 Setting On-screen Display Selectable items On Off Description All On-screen Displays are displayed. INPUT/VOLUME/AV MUTE/FREEZE/ AUTO SYNC/RESIZE/PICTURE MODE/ "An invalid button has been pressed." are not displayed. 6 Selecting the On-screen Display Language The projector can switch the on-screen display language among 11 languages. English Deutsch Español Nederlands Français Italiano Svenska Português Useful Features 43