Sharp DT 100 DT-100 Operation Manual - Page 43

Picture Adjustment ("Picture" menu) (Continued) Menu operation n Page 39 2 Adjusting the Image 4 Progressive Adjustment Items Contrast Bright Color*1 Tint*1 *2 Sharp*1 Red Blue Bright Boost O button Q button For less contrast. For less brightness. For less color intensity. For making skin tones purplish. For less sharpness. For weaker red. For weaker blue. For high fidelity color reproduction. For more contrast. For more brightness. For more color intensity. For making skin tones greenish. For more sharpness. For stronger red. For stronger blue. For more vividness. *1 Not displayed in the RGB input mode. *2 "Tone" will appear on the menu screen only when PAL or SECAM signals are input (including when forcibly changed to those input signals). There is basically no need to adjust "Tone", but you can adjust the picture tone with this adjustment when inputting PAL or SECAM signals . Note • To reset all adjustment items, select "Reset" and press hENTER. Selectable items Description 2D Useful to display fast-moving images Progressive such as sports. 3D Useful to display relatively slow- Progressive moving images such as drama and documentary more clearly. Film Mode Reproduces the image of film source* clearly. Displays the optimized image of film transformed with three-two pull down (NTSC and PAL60Hz) or two-two pull down (PAL50Hz and SECAM) enhancement to progressive mode images. * The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progressive video at 60 frames/second with NTSC and PAL60Hz or at 50 frames/second with PAL50Hz and SECAM to play back a high-definition image. Note • In NTSC or PAL60Hz, even if the 3D Progressive mode has been set, the three-two pull down enhancement will be enabled automatically when the film source has been entered. • When the image is blurred or noisy, switch to the optimal mode. • When using progressive inputs, inputs are directly displayed so that 2D Progressive, 3D Progressive and Film Mode cannot be selected. 3 Adjusting the Color Temperature Selectable items Description 5500K 6500K 7500K 8500K 9300K 10500K For lower color temperature for warmer, reddish incandescent-like images. P R For higher color temperature for cooler, bluish, fluorescent-like images. Note • Values on "CLR Temp" are only for general standard purposes. 42 5 Lamp Setting Selectable items Brightness Eco + Approx. Quiet 87% 100% Bright Fan sound Low Normal Power consumption (When using AC 100V) 305W 350W Lamp Life Approx. 3,000 hours Approx. 2,000 hours Note • When "Lamp Setting" is set to "Eco+Quiet", the power consumption will decrease and the lamp life will extend. (Projection brightness decreases approximately 13%.)