Sharp DV-RW550U Operation Manual - Page 101

Before you start Connections Getting started Recording Others Troubleshooting (cont'd) Error message Cause Solution Recording Error You cannot record more than 99 titles on one disc. (The maximum is 99) Recording Error You cannot record more than 999 chapters on one disc. (The maximum is 999) You are trying to record on the disc on which the number of recording titles already reached the maximum (99). Delete unnecessary titles (pages 65, 69). You are trying to record on the VR mode DVD-RW disc on which the number of recording chapters already reached the maximum (999). This unit cannot delete the original chapter. Delete unnecessary chapter marker using other DVD recorders. Delete unnecessary titles from the Original (page 69). Recording Error You cannot record on this disc as Control Information is full. This disc has no space to write the Control Information when recording or deleting contents. When editing has been repeatedly performed, the control Information area may become full even if the recording area still has enough space. Delete unnecessary titles (pages 65, 69). Recording Error You cannot record on the disc as Power Calibration Area is full. When recordings are performed repeatedly on an unstable disc, this area may become full. Every time you insert a disc for recording, the disc's working area will be taken up. And if you repeat this frequently, it will be used up sooner and you may not be able to record full 99 titles. Insert a new disc. Recording Error This disc is already finalized. You are trying to record on the disc already finalized. Undo finalizing of the disc (page 44). Disc Playback Editing Changing the Setting menu VCR functions Others Español * If you are still having trouble with this unit after checking Troubleshooting, write down the error code and the error description, and call a SHARP Authorized Service Center for inspection. (See Service Information on page 104.) You can watch the TV programs with the tuner of the unit. (Usually channel 3 or 4 of the TV is available for the RF converter setting.) Be sure to connect the unit to a TV using the Round Coaxial cable. Refer to page 14. 1 Select channel 3 on your TV. 2 Press VIDEO/TV on the remote control. • If noise appears, change the RF output channel of the unit to CH 4 by pressing VIDEO/TV for 3 seconds.The RF output channel will alternate between CH3 and CH4 as follows. RF converter output for more than 3 seconds 3 seconds (RF ON) CH4 3 seconds (RF ON) CH3 3 seconds (RF ON) CH4 3 seconds • Every time the RF output channel is changed, CH3 or CH4 will appear on the front panel display. 2 VCR/DVD RECORDER COMBINATION 101