Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 366
Using A Program To Send
View all Sharp DX-C310FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 366 highlights
FACSIMILE USING A PROGRAM TO SEND Keys in the display can be selected with the arrow keys and the [OK] key. Place the original. Place the original in the document feeder tray or on the document glass as appropriate for the functions stored in the 1 program. When the original is a different size than the size setting, set the original size. ☞ SPECIFYING THE SCAN SIZE AND SEND SIZE (page 4-50) Select the special modes. 2 (1) Select the [Special Modes] key. (2) Select the [Program] key. ☞ SPECIAL MODES (page 4-69) 3 Program 1 Program 2 Program 3 Program 4 Program 5 BACK OK Retrieve the stored program. Select the desired program key. Select additional settings. When a program is used, the following settings can be additionally specified: • Image settings: Original scan size*, send size • Special modes: Timer Transmission, Card Shot, Own Name Select, Transaction Report 4 * When stored in the program, this cannot be additionally specified. • The screen that appears will vary depending on the destination stored in the program. • The mode cannot be changed here. • Functions stored in the program cannot be canceled here. Press the [BLACK & WHITE START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. 5 When scanning finishes, place the next original and press the [BLACK & WHITE START] key. Repeat until all pages have been scanned and then select the [Read-End] key. A beep will sound to indicate that scanning is finished. To cancel scanning... Press the [STOP] key ( ). 4-73 Contents