Sharp DX-C310FX DX-C310 DX-C3400 Operation Manual - Page 514
Select the [Side Erase] key.
View all Sharp DX-C310FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 514 highlights
SCANNER/INTERNET FAX Select the erase settings. (1) (3) (2) BACK OK ● When [Erase] is selected (1) Select the [Erase] key. (2) Set the erasure width. Select the number display and press the [OK] key. A number entry screen will appear. Enter the desired number with the numeric keys and select the [OK] key in the number entry screen. 0" to 1" (0 mm to 20 mm) can be entered. You can also change the number with the keys. (3) Select the [Basic Menu] key. (1) ● When [Side Erase] is selected BACK OK (1) Select the [Side Erase] key. (2) Set the sides to be erased. Select the checkboxes erase. of the sides that you wish to (2) 4 (4) BACK OK (3) BACK OK (5) (3) Select the [Erase Position for Original Side 2] key. (4) Set the erase edge on the reverse side. When performing two-sided scanning, set the erase edge on the reverse side. • If you select the [Same Side as Side 1] key, the edge in the same position as on the front side will be erased. • If you select the [Different Side from Side 1], the edge in the position opposite to the erased edge on the front side will be erased. (5) Press the [BACK] key. (6) Set the erasure width. Select the number display and press the [OK] key. A number entry screen will appear. Enter the desired number with the numeric keys and select the [OK] key in the number entry screen. 0" to 1" (0 mm to 20 mm) can be entered. You can also change the number with the keys. BACK OK (7) Select the [Basic Menu] key. (6) (7) BACK OK 5-92 Contents