Sharp FP-N60CX FP-N60CX Operation Manual - Page 13
Preparation
UPC - 074000661370
View all Sharp FP-N60CX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
PREPARATION INSERTING BATTERIES IN THE REMOTE CONTROL 1 Remove the back cover Press and slide the back cover to remove. 2 Insert batteries Insert batteries with and as shown below. 3 Close the back cover ENGLISH Battery Information • The batteries for this remote control are for initial use only . Change the batteries when necessary. • Incorrect usage of the batteries may cause battery fluid leakage and/or damage. Take care of the following when handling: • When replacing the batteries, replace both batteries with new ones of the same type. (Use 2 AA manganese batteries.) • When not using the unit or remote control for an extended period, remove the batteries. (This prevents malfunction of the remote control from battery fluid leakage.) • The batteries of the accessory are for initial use only and may be depleted within 1 year. REMOTE CONTROL USE • Operate with the remote control facing the main unit (Receiver). • The signal range is about 23 feet (front). • Make sure there are no objects blocking the path of the signal. • A beep sound will be heard from the main unit when a signal is received. Receiver Transmitter NOTE • Avoid dropping or damaging the remote control. In addition, be sure the remote control avoids moisture or place in direct sunlight or near an electric heater, etc., otherwise a malfunction may occur. E-11