Sharp FP-N60CX FP-N60CX Operation Manual - Page 15

ENGLISH 2 Filter Installation 1 After the True HEPA Filter is removed from the plastic bag, place it within the Filter Frame with the tabs facing up. (See the diagram to the right.) Ensure that the filter is installed correctly. Do not install the filter backwards or the unit will not operate properly. 2 After removing the Washable Active Carbon Filter from the plastic bag, place it within the Filter Frame on top of the True HEPA Filter. (See the diagram to the right.) True HEPA Filter Filter Frame Washable Active Carbon Filter True HEPA Filter Filter Frame 3 Next, place the Filter Separator and then the Pre-Filter within the Filter Frame. • Place the Filter Sepa- Rib of the Filter Separator rator so that the ribs are facing down as shown in the diagram on the right. • Insert the tabs, (4), of the Pre-Filter into the associated holes found on the Filter Frame. • Mount the Filter Frame as shown in the diagram to the right to the main unit. Pre-Filter Filter Separator Washable Active Carbon Filter Holes Filter Frame Filter Frame 4 Fill in the usage start date on the Date Label, which can be found on upper left corner of the Main unit. Mount the Front Panel to the Main Unit. Use the date as a guide for your Filter Replacement schedule. Date Label Tabs Tabs (4 places) E-13