Sharp FP-N60CX FP-N60CX Operation Manual - Page 20

CARE AND MAINTENANCE (To maintain optimum performance of this product, please clean the unit including its sensors and filters periodically.) When cleaning the unit, be sure to unplug the power cord, and never handle the plug with wet hands. Electrical shock and/or bodily injury may occur as a result. MAIN UNIT To prevent dirt or stains on the main unit, clean as often as necessary. If stains are allowed to remain, they may become hard to clean. Wipe with a dry, soft cloth For stubborn stains or dirt, use a soft cloth dampened with warm water. Do not use volatile fluids Benzene, paint thinner, polishing powder, etc., may damage the unit surface. Do not use detergents Detergent ingredients may damage the unit surface. Keep the unit dry Never apply water to the unit. DUST SENSOR ODOR SENSOR The maintenance cycle for both the Odor and Dust sensors is every 3 months. The sensitivity of the sensors will become unstable if the odor or dust sensor is dirty or blocked. Please clean the parts as outlined below. DUST SENSOR 1 Remove the front panel and detach the sensor filter • Remove the sensor filter while pulling the tab on the sensor cover. 2 Remove any dust from the sensor filter. • Detach the sensor filter and tap it lightly with your hand to remove the dust. If it is very dirty, wash it with water and then allow it to dry thoroughly. Sensor cover Sensor filter 3 Insert the sensor filter into the cover, install it in the main unit and attach the front panel. • The sensor filter can be inserted either way round. CAUTION • Do not forget to reinstall the sensor cover before restarting the unit. • Do not insert any foreign objects into the filter. This may result in a malfunction or damage to the unit. Sensor cover Sensor opening ODOR SENSOR Remove dust from the surface of the sensor opening with a vacuum cleaner. E-18