Sharp FPP60CX FP-P60CX Operation Manual - Page 11

PREPARATION INSERTING BATTERIES IN THE REMOTE CONTROL 1 Remove the back cover Press and slide the back cover to remove. 2 Insert batteries Insert batteries with shown below. and as 3 Close the back cover Battery Information • The battery life is about 1 year. • The batteries for this remote control are for initial use only . Change the batteries when necessary. • Incorrect usage of the batteries may cause battery fluid leakage and/or damage. Take care of the following when handling: • When replacing the batteries, replace both batteries with new ones of the same type. (Use 2 AA manganese batteries.) • When not using the unit or remote control for an extended period, remove the batteries. ENGLISH ESPAÑOL FRANÇAIS REMOTE CONTROL USE • Operate the remote control facing the main unit OPERATION receiver. • The signal range is about 23 feet (7m). • Make sure there are no objects blocking the path of the signal. • A beep sound will be heard from the main unit when a signal is received. Transmitter Receiver NOTE • Avoid dropping or damaging the remote control, using in a high humidity condition, in direct sunlight or near a heat source. E-9