Sharp FPP60CX FP-P60CX Operation Manual - Page 14

OPERATION MAIN UNIT OPERATION CLEAN FILTER Indicator Light NIGHT MODE Indicator Light CLEAN SIGN Light Plasmacluster Indicator Light Main Unit Controls • AUTO • QUICK CLEAN • POLLEN • SILENT • MEDIUM • MAX • NIGHT MODE MODE Selection Button Power ON/OFF Button 21 Plasmacluster 1 Power ON/OFF Button • Used to start operation (short beep) and stop operation (long beep) • Plasmacluster Indicator Light and Fan Speed Indicator Light turn on/off. • Unless unplug the power cord, is unplugged the operation starts in the previous mode the unit was operated in. 2 MODE Selection Button • The operation mode can be switched, and the Indicator Light will turn on. AUTO operation The fan speed is automatically switched (HIGH*, MEDIUM, SILENT) depending on the amount of impurities in the air. The sensors detect the impurities for efficient air purification. QUICK CLEAN operation The unit will operate at HIGH* fan speed for 15 minutes, then will operate at Auto operation. The operation mode is effective when quick removal of impurities in the air is desired. POLLEN mode operation The unit will operate at HIGH* fan speed for 10 minutes, then will alternate between NORMAL and HIGH for 20 minutes. 10 minutes: HIGH fan speed 20 minutes: MEDIUM fan speed 20 minutes: HIGH fan speed NIGHT MODE Operation The fan speed is automatically switched between MEDIUM and SILENT, depending on the amount of impurities in the air. The Plasmacluster Indicator Light and Clean-Sign Light will turn off. MAX operation The unit will operate at a fan speed of MAX. MEDIUM operation The unit will operate at a fan speed of MEDIUM. SILENT operation The unit will operate quietly using minimal air intake. * HIGH fan speed is an intermediate speed between MEDIUM and MAX. E-12