Sharp FPP60CX FP-P60CX Operation Manual - Page 16

OPERATION REMOTE CONTROL OPERATION POWER ON/OFF Button •When you press the POWER ON/OFF Button, a short beep will sound and operation will start in AUTO Mode. • Unless the power cord has been unplugged the operation starts from the previous mode the unit was operated in. • To stop, press the POWER ON/OFF Button again. A long beep will sound and operation will stop. Auto (Fan Speed) Button The fan speed switches automatically depending on the amount of impurities in the air. Manual (Fan Speed) Button The fan speed can be switched among SILENT, MEDIUM and MAX settings. NIGHT MODE Button See page E-12 Operations available with the Remote Control • AUTO • MANUAL • POLLEN • OFF TIMER • NIGHT MODE • Quick CLEAN • LIGHTS ON/OFF Plasmacluster Ion mode selections • AUTO • CLEAN • ION CONTROL • OFF Transmitter Filter Reset Button When the Washable Active Carbon Filter is cleaned and reinserted into the main unit, press the Filter Reset Button. Pollen Mode Operation Button See Page E-12 Off Timer Button The set time switches every time the button is pressed as shown below. 1 hour 4hours Cancel 8 hours QUICK CLEAN Button See page E-12 LIGHTS ON/OFF Button Switches the Plasmacluster Indicator Light and CLEANSIGN Light either ON or OFF. • The indicator light shows the remaining time. • The unit will stop operation when the time is up. Plasmacluster Ion Mode Selections AUTO When pressed, the unit will switch between Clean Mode and the Ion Control Mode automatically depending on the amount of impurities in the air as detected by the odor sensor. Clean Mode will operate for 1 minute when the Auto function is selected. CLEAN When pressed, the unit will constantly operate in the Clean Mode, in which the same numbers of positive and negative ions are discharged. The Plasmacluster Indicator Light is blue. ION CONTROL When pressed, the unit will constantly operate in Ion Control Mode. The Plasmacluster Ion Indicator Light is green. OFF The generation of ions will be ceased and the Plasmacluster Indicator Light will go out. E-14