Sharp FPP60CX FP-P60CX Operation Manual - Page 17

CARE AND MAINTENANCE To maintain optimum performance of this air purifier, please clean the unit including the sensor and filters periodically. When cleaning the unit, be sure to unplug the power cord, and never handle the plug with wet hands. Electrical shock and/or bodily injury may occur as a result. MAIN UNIT Care Cycle 1 month To prevent dirt or stains on the main unit, clean as often as necessary. If stains are allowed to remain, they may become hard to clean. Wipe with a dry, soft cloth For stubborn stains or dirt, use a soft cloth dampened with warm water. Do not use volatile fluids Benzene, paint thinner, polishing powder, etc., may damage the surface. Do not use detergents Detergent ingredients may damage the unit. Keep the unit away from water ODOR SENSOR Care Cycle 2 months The sensitivity of the sensor will become unstable if the odor sensor is dirty or blocked. Remove dust from the surfaces of the sensor openings using a vacuum cleaner. Opening of odor sensor ENGLISH ESPAÑOL FRANÇAIS FILTER CLEANING Care Cycle 2 months Remove the Front Panel, Clean the surface of the Pre-Filter lightly with a vacuum cleaner. If it is very dirty remove it from the Filter Frame and wash it. NOTE • In case of washing, use a soft brush etc. and cold/warm water. • Metal brushes or scrub brushes may cause damage. • After washing, leave it in the shade until it is dry. Then place it back to the frame. • Never wash or clean the True HEPA Filter using the nozzle of a vacuum cleaner directly. This will greatly decrease the performance of the filters. E-15