Sharp GX20 Service Manual - Page 44
Procedures of white defect correction
View all Sharp GX20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
GX20 5. Procedures of white defect correction CONFIDENTIAL 1. Attach the battery pack and then connect the Data cable. 2. Access the normal mode by holding down the "End/Power" key. 3. Send the [AT+XDIAG] command to receive the response [DIAGREADY]. 4. "Function Mode *GX20*"is shown on the display. 5. Cover the camera front to block off light completely. 6. Transmit the [WHC00840120000000] command. 7. Response will be received if the transmission is completed after 20 to 30 seconds. Be sure to continue to block off light during this process. • In case of [LDDEVPRMOK]: aaaabbb will be received. aaaa: the number of white defects bbb: the maximum level of dark current • In case of [LDDEVPRMNG]: 000000 will be received. This indicates light was not blocked completely. Go back to step 6. 8. Send the [WH] command. 9. After receiving th response [OK], send the [POWDOWN] command. 10.Power off and then remove the Data cable. * White defect correction White defects indicate pixel defects in the image detected by the light sensor. These appear as white spots even when light is completely blocked off (even on a black background). White defect correction solves this problem. 2 - 38