Sharp HT-SB500 HT-SB500 Operation Manual - Page 15

Speaker connections to TVs (continued) Connecting to a TV If the TV/monitor has an audio output, connect it to the LINE IN 1 jacks on the rear of the speaker. To select LINE IN 1 function: On speaker: Press FUNCTION button repeatedly until "L1" is displayed. On remote control: Press LINE 1-2 button repeatedly until "L1" is displayed. TV Connecting to a TV (with Headphone jack) If the TV/monitor has headphone jack, connect it to the LINE IN 2 jack on the rear of the speaker. HT-SB500 To select LINE IN 2 function: On speaker: Press FUNCTION button repeatedly until "L2" is displayed. On remote control: Press LINE 1-2 button repeatedly until "L2" is displayed. TV HEADPHONE To audio output jacks RCA cable (supplied) To LINE IN 1 jacks To HEADPHONE jack Audio cable (not supplied) To AUDIO LINE IN 2 jack Preparation for Use Speaker Speaker Notes: If the TV volume is continuously in low level, the speaker will automatically power off. Increase the TV output volume to enjoy the sound from the speaker. If the speaker volume is continuously in very high level, the speaker will mute and recover after several seconds. The information display on the sound bar system will not display anything when increasing or decreasing the volume level. 15