Sharp HT-SB500 HT-SB500 Operation Manual - Page 25

Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production speaker. There may be some deviations from these values in individual speaker. General Power source Power consumption Output power DC IN 12V 4A: AC/DC adaptor (AC 100 - 240 V ~ 50/60 Hz) Power on: 14 W RMS: Total 32 watts RMS: Front Left/Right: 5 watts per channel into 12 ohms at 1kHz, 10% total harmonic distortion Center: 7 watts per channel into 6 ohms at 1 kHz, 10% total harmonic distortion Subwoofer: 15 watts per channel into 3 ohms at 100 Hz, 10% total harmonic distortion FTC: Front Left/Right: Minimum 4 watts per channel into 12 ohms at 200 Hz to 20 kHz, 10% total harmonic distortion Center: Minimum 6 watts per channel into 6 ohms at 1 KHz, 10% total harmonic distortion Subwoofer: Minimum 14 watts per channel into 3 ohms at 100 Hz, 10% total harmonic distortion Speaker Audio output terminals Input terminals Dimensions Weight HT-SB500 3.1-way Speaker System Front speakers: 1-9/16" (40 mm) Full Range (x 2) Impedance: 12 ohms / Channel Centre Speaker: 1-9/16" (40 mm) Full Range (x 2) Impedance: 6 ohms (12 ohms x 2 parallel connections) Subwoofer: 2-1/4" (57 mm) Woofer (x4) Impedance: 3 ohms (12 ohms x 4 parallel connections) Subwoofer Pre Out: 10 kohms Analogue input (LINE 1): RCA type x 1pair (L/R) 500 mV / 47 kohms Analogue input (LINE 2): Stereo mini jack Ø 3.5 mm 100 mV / 47 kohms Coaxial digital input (DIGITAL 1): RCA type x 1 Optical digital input (DIGITAL 2): Square type x 1 Width: 38-3/4" (985 mm) Height: 3-3/4" (96 mm) Depth: 2-3/4" (70 mm) 4.84 lbs. (2.2 kg) References 25