Sharp LC-22L50M-BK Operation Manual - Page 2

Antenna connection, Connecting external devices Continued, Connecting external devices - manual

Page 2 highlights

Antenna connection Use the following diagram if you connect an outdoor antenna. VHF/UHF antenna VHF/UHF antenna 300-ohm twin-lead flat feeder (not supplied) or 75-ohm coaxial cable (round cable) (not supplied) 75-ohm impedance converter (not supplied) Antenna adaptor If your outdoor antenna uses a 75-ohm coaxial cable, connect an antenna adaptor and plug it into the antenna jack at the rear of the set. + + If your outdoor antenna uses a 300-ohm twinlead flat feeder, connect a 300-ohm to 75-ohm impedance converter, connect an antenna adaptor and plug it into the antenna jack at the rear of the set. Antenna Connect the antenna cable from your antenna-/cable socket or the (room-/roof) antenna for antenna input terminal on the back of your TV set to receive digitally/terrestrially broadcast stations. An indoor antenna can also be used under good reception conditions. Passive and active room antennas are offered commercially. In an active antenna its power is supplied via the antenna input terminal. The supply voltage (5V) must be correspondingly set under "Supply Voltage". Connecting external devices You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from TV/VIDEO on the remote control unit or TV/VIDEO on the TV. CAUTION • To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital TV STB (Set Top Box), PC or other external equipment. • Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections. 3 Connecting external devices (Continued) Connecting a VCR, game console or camcorder A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected using the AV-1 IN/AV-2 IN or COMPONENT terminals. When using component cable (commercially available) When using composite cable or S-VIDEO cable (commercially available) VCR/Game console/ Camcorder PR PB (CR) (CB) Y R - AUDIO - L VCR/Game console/Camcorder S-VIDEO VIDEO R - AUDIO - L or Connecting a DVD player/Digital TV STB (Set Top Box) You can use the HDMI or COMPONENT terminals when connecting to a DVD player/Digital TV STB (Set Top Box) and other audiovisual equipment. When using HDMI-certified cable (commercially available) When using component cable (commercially available) DVD player/ Digital TV STB (Set Top Box) DVD player/ Digital TV STB (Set Top Box) PR PB (CR) (CB) Y R - AUDIO - L Connecting a PC You can use the PC terminals when connecting to a PC. PC ANALOGUE RGB AUDIO (L/R) 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

Antenna connection
Connecting external devices (Continued)
3
4
Connecting external devices
Connecting a VCR, game console or camcorder
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected
using the AV-1 IN/AV-2 IN or COMPONENT terminals.
When using component cable
(commercially available)
When using composite cable or S-VIDEO cable
(commercially available)
R – AUDIO – L
Y
P
R
(C
R
)
P
B
(C
B
)
R – AUDIO – L
VIDEO
S-VIDEO
Connecting a DVD player/Digital TV STB (Set Top Box)
You can use the HDMI or COMPONENT terminals when connecting to a DVD player/Digital TV STB (Set Top
Box) and other audiovisual equipment.
When using HDMI-certified cable
(commercially available)
When using component cable
(commercially available)
R – AUDIO – L
Y
P
R
(C
R
)
P
B
(C
B
)
Connecting a PC
You can use the PC terminals when connecting to a PC.
ANALOGUE
RGB
AUDIO
(L/R)
Use the following diagram if you connect an outdoor antenna.
+
+
If your outdoor antenna uses a 75-ohm coaxial
cable, connect an antenna adaptor and plug it
into the antenna jack at the rear of the set.
If your outdoor antenna uses a 300-ohm twin-
lead flat feeder, connect a 300-ohm to 75-ohm
impedance converter, connect an antenna
adaptor and plug it into the antenna jack at the
rear of the set.
Antenna
Connect the antenna cable from your antenna-/cable socket or the (room-/roof) antenna for antenna input
terminal on the back of your TV set to receive digitally/terrestrially broadcast stations.
An indoor antenna can also be used under good reception conditions. Passive and active room antennas
are offered commercially. In an active antenna its power is supplied via the antenna input terminal.
The supply voltage (5V) must be correspondingly set under “Supply Voltage”.
VHF/UHF
antenna
or
DVD player/
Digital TV STB
(Set Top Box)
or
VHF/UHF
antenna
300-ohm twin-lead flat
feeder (not supplied)
75-ohm
impedance
converter
(not supplied)
75-ohm coaxial
cable (round cable)
(not supplied)
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD
player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from
TV/VIDEO
on the remote control unit or
TV/VIDEO
on the TV.
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital
TV STB (Set Top Box), PC or other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
VCR/Game
console/
Camcorder
VCR/Game
console/Camcorder
DVD player/
Digital TV STB
(Set Top Box)
PC
Antenna
adaptor