Sharp LC32BD60U LC-32BD60U LC37BD60U Operation Manual - Page 25

Disc Playback This section explains playback of commercially available BD-VIDEO and DVD-VIDEO discs (like movies), CDs, and recorded DVD-RW/R discs. Loading a Disc Insert the disc into the disc slot. • The label side of the disc must face towards the front of the TV (towards you). • When inserting a dual-sided DVD, the side you want to play must face towards the rear of the TV (away from you). Disc slot • If the TV is jolted or moved while a disc is protruding from the slot, the disc may fall out. • To reinsert a protruding disc, first remove the disc fully and then load it again. • During loading, the disc may be unable to be ejected. Wait until the loading is complete and playback starts to eject the disc. BD/DVD-VIDEO Playback BD-VIDEO DVD-VIDEO BD-RE BD-R The label side of the disc • When the disc is loaded, the DISC indicator lights up. • Playback may begin automatically, depending on the disc. • The menu may be displayed first, depending on the disc. Perform playback operation by following the directions on the screen. • In the following cases, the disc will be ejected automatically. - When a disc using an incompatible standard or format was inserted. - When the disc was inserted facing the wrong way. Removing a Disc 1 Press on the TV or EJECT on the remote control unit. (EJECT) button 1 Load a disc. • Playback may begin automatically, depending on the disc. 2 Press d. • Playback begins from the first title. • The menu may be displayed first, depending on the disc. Perform playback operation by following the directions on the screen. • The disc load time may vary depending on the disc. • During playback of HDMI equipment connected to the TV, pressing d controls playback of the HDMI equipment, not playback on the Disc Drive on the TV. • Playback on the Disc Drive will stop when you switch the input source or select a TV channel. To stop playback Press H. Resume playback function After stopping the disc, press d to resume playback from the point where the disc has been stopped. • To play back from the beginning of the disc, press H twice and then press d. (This may not work depending on the type of disc. In this case, eject the disc or enter standby.) • The disc is ejected and protrudes partly from the slot. 2 Carefully grasp the protruding disc and pull it out. • Resume playback may not function depending on the disc. • After a disc has been ejected, it should be removed from the slot without delay. 23