Sharp LL-S201A Operation Manual - Page 25
HDMI input terminal pins, DisplayPort input terminal pins, Supported frequency, DDC plug and play
View all Sharp LL-S201A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Specifications nSupported frequency Resolution 640×480 800×600 1024×768 720×480p 1280×720p 1920×1080p 720×576p Frame rate 60Hz 60Hz 60Hz 59.94/60Hz 50/59.94/60Hz 50/59.94/60Hz 50Hz Remarks VGA SVGA XGA * All are compliant only with non-interlaced. * Each is scaled to 16:9 and displayed using the full screen. * Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input. nDDC (plug and play) The monitor supports the VESA DDC (Display Data Channel) standard. DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect plug-and-play monitors. There are several types of DDC, depending on the communication method used. This monitor supports DDC2B. nHDMI input terminal pins (HDMITM Connector) nDisplayPort input terminal pins (DisplayPort 20 pin) No. Function 1 TMDS data 2+ 2 TMDS data 2 shield 3 TMDS data 2- 4 TMDS data 1+ 5 TMDS data 1 shield 6 TMDS data 1- 7 TMDS data 0+ 8 TMDS data 0 shield 9 TMDS data 0- 10 TMDS clock+ No. Function 11 TMDS clock shield 12 TMDS clock- 13 CEC 14 N.C. 15 SCL 16 SDA 17 DDC/CEC GND 18 +5V 19 Hot-plug detection No. Function 1 MainLane 3- 2 Gnd 3 MainLane 3+ 4 MainLane 2- 5 Gnd 6 MainLane 2+ 7 MainLane 1- 8 Gnd 9 MainLane 1+ 10 MainLane 0- No. Function 11 Gnd 12 MainLane 0+ 13 Gnd 14 Gnd 15 Aux + 16 Gnd 17 Aux - 18 Hot-plug detection 19 Gnd 20 3.3 V 25 E