Sharp MD-M3 Operation Manual - Page 23
To specify station names and select, stations manually station select
View all Sharp MD-M3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
(Continued) s To specify station names and select stations manually (station select) You can receive for a desired station by specifying the station name (BBC R1, BBC R2, etc.) from among the stations that have been stored in memory. (ASPM is convenient for storing stations in memory.) Before starting this operation, you must store one or more station names in memory. 1 4,6 5 5 Within 6 seconds, press the PRESET (X or W) button to select a desired station name you want. q Each time the button is pressed, the station name will appear. If the button is held down for more than 0.5 seconds, the station name will continuously change. 6 Whilst the selected station name is flashing (within 6 seconds), press the STATION button again. 2,3 kHz 4,6 5 1 2,3 1 Press the ON/STAND-BY button to turn the power on. 2 Press the TUNER (BAND) button. 3 Press the TUNER (BAND) button to select the FM ST or FM band. 4 Press the STATION button. DISC TOC TRACK MEMORY RANDOM TOTAL REMAIN kHz REC MHz SLEEP q After the selected station name has been lit for 1 second, the preset station which corresponds to the selected station name will be recalled. To cancel the station select operation: Press the STATION button whilst "STATION" and "SELECT" appear alternately. q "STATION" and "SELECT" will appear alternately for about 6 seconds. 21