Sharp MD-M3 Operation Manual - Page 9

(Continued) s Removing the speaker grilles s Connecting the AC power lead AC INPUT To AC INPUT AC 230 V, 50 Hz 1 Remove the lower part of the speaker grille first. 2 Remove the upper part of the speaker grille. Caution: When the speaker grilles are removed, the speaker diaphragms are exposed. Make sure nothing comes into contact with the speaker diaphragms. s Speaker cushion To an AC socket Connect the AC power lead to the AC INPUT socket, then connect the AC power lead plug to an AC socket. Notes: q Unplug the AC power lead from the AC socket if the unit will not be in use for a prolonged period of time. q Never use a power lead other than the one supplied. Use of a power lead other than the one supplied may cause an electric shock or fire. s Demo mode Attach the cushions to the bottom of the speaker to prevent it from sliding. s Placing the system 10 cm (4") 10 cm (4") DEMO ON OFF When the AC power lead is first connected, the unit will enter the demonstration mode and the words will scroll across the display continuously. 20 cm (8") 10 cm (4") To cancel the demonstration mode: When in the demonstration mode, set the DEMO switch to OFF. Then turn the power on and enter the stand-by mode to cancel the demonstration mode and to enter the low power consumption mode. q Be sure to keep space between the units for ventilation. q Keep the top of this unit at least 20 cm (8") away from the wall, and the back at least 10 cm (4") away. Note: q Do not place the system or speakers near the Note: q When the unit is in the low power consumption mode, the display will disappear. To return to the demonstration mode: Set the DEMO switch to ON. Then turn the power on and enter the stand-by mode. television set as the magnetic fields produced may cause irregular colours to be displayed. 7